MSP 34x1G
PRELIMINARY DATA SHEET
Table 3–11: Write Registers on I2C Subaddress 12hex, continued
Register
Address
Function
Name
SOURCE SELECT AND OUTPUT CHANNEL MATRIX
Source for:
00 08hex
00 09hex
00 0Ahex
00 41hex
00 0Bhex
00 0Chex
Loudspeaker Output
Headphone Output
SCART1 DA Output
SCART2 DA Output
I2S Output
SRC_MAIN
SRC_AUX
SRC_SCART1
SRC_SCART2
SRC_I2S
Quasi-Peak Detector
SRC_QPEAK
bit [15:8]
0
“FM/AM”: demodulated FM or AM mono signal
“Stereo or A/B”: demodulator Stereo or A/B signal
1
(in manual mode, this source is identical to the NICAM
source in the MSP 3410D)
3
4
“Stereo or A”: demodulator Stereo Sound or
Language A (only defined for Automatic Sound Select)
“Stereo or B”: demodulator Stereo Sound or
Language B (only defined for Automatic Sound Select)
2
5
6
SCART input
I2S1 input
I2S2 input
For demodulator sources, see Table 2–2.
Matrix Mode for:
Loudspeaker Output
Headphone Output
SCART1 DA Output
SCART2 DA Output
I2S Output
00 08hex
00 09hex
00 0Ahex
00 41hex
00 0Bhex
00 0Chex
MAT_MAIN
MAT_AUX
MAT_SCART1
MAT_SCART2
MAT_I2S
Quasi-Peak Detector
MAT_QPEAK
bit [7:0]
00hex
10hex
20hex
30hex
Sound A Mono (or Left Mono)
Sound B Mono (or Right Mono)
Stereo (transparent mode)
Mono (sum of left and right inputs divided by 2)
special modes are available (see Section 6.5.1. on page 95)
In Automatic Sound Select mode, the demodulator source channels are set
according to Table 2–2. Therefore, the matrix modes of the corresponding out-
put channels should be set to “Stereo” (transparent).
32
MICRONAS INTERMETALL