MSP 34x1G
PRELIMINARY DATA SHEET
Table 2–1: Performed actions of the Automatic Sound Selection
Selected TV Sound Standard
Performed Actions
B/G-FM, D/K-FM, M-Korea,
and M-Japan
Evaluation of the identification signal and automatic switching to mono, stereo, or bilingual. Preparing four
demodulator source channels according to Table 2–2. Identification is acquired after 500 ms.
B/G-NICAM, L-NICAM, I-NICAM,
and D/K-NICAM
Evaluation of NICAM-C-bits and automatic switching to mono, stereo, or bilingual. Preparing four
demodulator source channels according to Table 2–2. NICAM detection is acquired within 150 ms.
In case of bad or no NICAM reception, the MSP switches automatically to FM/AM mono and switches
back to NICAM if possible. A hysteresis prevents periodical switching.
B/G-FM, B/G-NICAM
or
D/K1-FM, D/K2-FM, D/K3-FM,
and D/K-NICAM
Automatic searching for stereo/bilingual-identification in case of mono transmission. Automatic and non-
audible changes between Dual-FM and FM-NICAM standards while listening to the basic FM-Mono sound
carrier.
Example: If starting with B/G-FM-Stereo, there will be a periodical alternation to B/G-NICAM in the
absence of FM-Stereo/Bilingual or NICAM-identification. Once an identification is detected, the MSP
keeps the corresponding standard.
BTSC-STEREO, FM Radio
BTSC-SAP
Evaluation of the pilot signal and automatic switching to mono or stereo. Preparing four demodulator
source channels according to Table 2–2. Detection of the SAP carrier. Pilot detection is acquired after
200 ms.
In the absence of SAP, the MSP switches to BTSC-Stereo if available. If SAP is detected, the MSP
switches automatically to SAP (see Table 2–2).
Table 2–2: Sound modes for the demodulator source channels with Automatic Sound Select
Source Channels in Automatic Sound Select Mode
Broadcasted Selected
Broadcasted
Sound Mode
FM/AM
(source select: 0)
Stereo or A/B
(source select: 1)
Stereo or A
(source select: 3)
Stereo or B
(source select: 4)
Sound
MSP Standard
Standard
Code3)
M-Korea
B/G-FM
D/K-FM
M-Japan
02
MONO
Mono
Mono
Mono
Stereo
A
Mono
Stereo
B
03, 081)
04, 05, 07, 0B1)
30
STEREO
Stereo
Stereo
BILINGUAL:
Left = A
Left = A
Languages A and B
Right = B
Right = B
B/G-NICAM
L-NICAM
08, 032)
09
NICAM not available or analog Mono
error rate too high
analog Mono
analog Mono
analog Mono
I-NICAM
0A
0B, 042), 052)
0C
MONO
analog Mono
analog Mono
analog Mono
NICAM Mono
NICAM Stereo
NICAM Mono
NICAM Stereo
NICAM A
NICAM Mono
NICAM Stereo
NICAM B
D/K-NICAM
D/K-NICAM
(with high
STEREO
deviation FM)
BILINGUAL:
Languages A and B
Left = NICAM A
Right = NICAM B
20, 21
20
MONO
Mono
Stereo
Mono
Stereo
Mono
Stereo
Mono
Stereo
Mono
Stereo
Mono
Stereo
Mono
Mono
Stereo
Mono
Stereo
SAP
STEREO
MONO+SAP
STEREO+SAP
MONO+SAP
BTSC
21
Left = Mono
Right = SAP
Left = Mono
Right = SAP
STEREO+SAP
Left = Mono
Right = SAP
Left = Mono
Right = SAP
Mono
SAP
FM Radio
40
MONO
Mono
Mono
Mono
Mono
STEREO
Stereo
Stereo
Stereo
Stereo
1)
The Automatic Sound Select process will automatically switch to the mono compatible analog standard.
The Automatic Sound Select process will automatically switch to the mono compatible digital standard.
The MSP Standard Codes are defined in Table 3–7 on page 25.
2)
3)
12
MICRONAS INTERMETALL