PRELIMINARY DATA SHEET
MSP 34x1G
Table 3–11: Write Registers on I2C Subaddress 12hex, continued
Register
Address
Function
Name
00 03hex
00 32hex
Treble Loudspeaker Channel
Treble Headphone Channel
TREB_MAIN
TREB_AUX
bit[15:8] 78hex
+15 dB
+14 dB
70hex
...
08hex
00hex
F8hex
...
+1 dB
0 dB
−1 dB
A8hex
A0hex
−11 dB
−12 dB
Higher resolution is possible: an LSB step results in a gain step of about 1/8 dB.
With positive treble settings, internal clipping may occur even with overall vol-
ume less than 0 dB. This will lead to a clipped output signal. Therefore, it is not
recommended to set treble to a value that, in conjunction with volume, would
result in an overall positive gain.
00 21hex
00 22hex
00 23hex
00 24hex
00 25hex
Equalizer Loudspeaker Channel Band 1 (below 120 Hz)
Equalizer Loudspeaker Channel Band 2 (center: 500 Hz)
Equalizer Loudspeaker Channel Band 3 (center: 1.5 kHz)
Equalizer Loudspeaker Channel Band 4 (center: 5 kHz)
Equalizer Loudspeaker Channel Band 5 (above: 10 kHz)
EQUAL_BAND1
EQUAL_BAND2
EQUAL_BAND3
EQUAL_BAND4
EQUAL_BAND5
bit[15:8] 60hex
+12 dB
+11 dB
58hex
...
08hex
00hex
F8hex
...
+1 dB
0 dB
−1 dB
A8hex
A0hex
−11 dB
−12 dB
Higher resolution is possible: an LSB step results in a gain step of about 1/8 dB.
With positive equalizer settings, internal clipping may occur even with overall
volume less than 0 dB. This will lead to a clipped output signal. Therefore, it is
not recommended to set equalizer bands to a value that, in conjunction with vol-
ume, would result in an overall positive gain.
Micronas
35
MICRONAS [ MICRONAS ]
