PRELIMINARY DATA SHEET
MSP 34x7G
Table 3–11: Write Registers on I2C Subaddress 12hex, continued
Register
Address
Function
Name
SOURCE SELECT AND OUTPUT CHANNEL MATRIX
Source for:
00 08hex
00 0Ahex
00 0Chex
Loudspeaker Output
SCART1 DA Output
Quasi-Peak Detector
SRC_MAIN
SRC_SCART1
SRC_QPEAK
bit[15:8]
0
1
“FM/AM”: demodulated FM or AM mono signal
“Stereo or A/B”: demodulator Stereo or A/B signal
(in manual mode, this source is identical to the NICAM
source in the MSP 3417D)
3
4
2
“Stereo or A”: demodulator Stereo Sound or
Language A (only defined for Automatic Sound Select)
“Stereo or B”: demodulator Stereo Sound or
Language B (only defined for Automatic Sound Select)
SCART input
For demodulator sources, see Table 2–2.
Matrix Mode for:
00 08hex
00 0Ahex
00 0Chex
Loudspeaker Output
SCART1 DA Output
Quasi-Peak Detector
MAT_MAIN
MAT_SCART1
MAT_QPEAK
bit[7:0]
00hex
10hex
20hex
30hex
Sound A Mono (or Left Mono) (RESET condition)
Sound B Mono (or Right Mono)
Stereo (transparent mode)
Mono (sum of left and right inputs divided by 2)
special modes are available (see Section 6.5.1. on page 73)
In Automatic Sound Select mode, the demodulator source channels are set
according to Table 2–2. Therefore, the matrix modes of the corresponding out-
put channels should be set to “Stereo” (transparent).
Micronas
25