MSP 34x0G
DATA SHEET
4.6. Electrical Characteristics
Abbreviations:
tbd = to be defined
vacant = not applicable
positive current values mean current flowing into the chip
4.6.1. Absolute Maximum Ratings
Stresses beyond those listed in the "Absolute Maximum Ratings" may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolut max-
imum rating conditions for extended periods will affect device reliability.
All voltages listed are referenced to ground (0 V, VSS ), except where noted.
All grounds must be externally connected low ohmic.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than absolut
maximum-rated voltages to this high-impedance circuit.
Table 4–1: Absolute Maximum Ratings
Symbol
Parameter
Pin Name
Limit Values
Max.
Unit
Min.
1)
TA
Ambient Operating Temperature
PSDIP64-1
PSDIP52-1/-2
PMQFP80-11
PMQFP64-2
−
0
°C
70
70
70
65
TC
Case Operating Temperature
PSDIP64-1
PSDIP52-1/-2
PMQFP80-11
PMQFP64-2
−
−
0
°C
°C
85
90
95
100
TS
Storage Temperature
−40
125
PMAX
Maximum Power Dissipation
PSDIP64-1
1300
1200
1000
930
mW
mW
mW
mW
PSDIP52-1/-2
PMQFP80-11
PMQFP64-2
VSUP1
VSUP2
VSUP3
VIdig
Supply Voltage 1
AHVSUP
DVSUP
AVSUP
−0.3
−0.3
−0.3
−0.3
−20
9.0
6.0
6.0
V
Supply Voltage 2
V
Supply Voltage 3
V
Input Voltage, all Digital Inputs
Input Current, all Digital Pins
V
SUP2+0.3
V
IIdig
−
+20
mA
1)
Measured on standard board according to JESD 51 Standard with maximum power consumption allowed for
this package.
62
May 27, 2003; 6251-476-1DS
Micronas
MICRONAS [ MICRONAS ]
