欢迎访问ic37.com |
会员登录 免费注册
发布采购

MSP3400G 参数 Datasheet PDF下载

MSP3400G图片预览
型号: MSP3400G
PDF下载: 下载PDF文件 查看货源
内容描述: 多标准音频处理器系列 [Multistandard Sound Processor Family]
分类和应用:
文件页数/大小: 106 页 / 1906 K
品牌: MICRONAS [ MICRONAS ]
 浏览型号MSP3400G的Datasheet PDF文件第89页浏览型号MSP3400G的Datasheet PDF文件第90页浏览型号MSP3400G的Datasheet PDF文件第91页浏览型号MSP3400G的Datasheet PDF文件第92页浏览型号MSP3400G的Datasheet PDF文件第94页浏览型号MSP3400G的Datasheet PDF文件第95页浏览型号MSP3400G的Datasheet PDF文件第96页浏览型号MSP3400G的Datasheet PDF文件第97页  
DATA SHEET  
MSP 34x0G  
Table 6–11: AD_CV parameters for Constant Input Gain (AD_CV[7]=0)  
Step  
AD_CV [6:1]  
Constant Gain  
Gain  
Input Level at pin ANA_IN1+ and ANA_IN2+  
maximum input level: 3 Vpp (FM) or 1 Vpp (NICAM)1)  
0
000000  
000001  
000010  
000011  
000100  
000101  
000110  
000111  
001000  
001001  
001010  
001011  
001100  
001101  
001110  
001111  
010000  
010001  
010010  
010011  
010100  
3.00 dB  
1
2
3
4
5
6
7
8
3.85 dB  
4.70 dB  
5.55 dB  
6.40 dB  
7.25 dB  
8.10 dB  
8.95 dB  
9.80 dB  
10.65 dB  
11.50 dB  
12.35 dB  
13.20 dB  
14.05 dB  
14.90 dB  
15.75 dB  
16.60 dB  
17.45 dB  
18.30 dB  
19.15 dB  
20.00 dB  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
maximum input level: 0.14 Vpp  
1)  
For signals above 1.4 Vpp, the minimum gain of 3 dB is switched and overflow of the A/D converter may result. Due to the  
robustness of the internal processing, the IC works up to and even more than 3 Vpp, if norm conditions of FM/NICAM or  
FM1/FM2 ratio are supposed. In this overflow case, a loss of FM-S/N ratio of about 10 dB may appear.  
6.3.5. Register MODE_REG  
Note: The use of this register is no longer recom-  
mended. It should be used only in cases where  
software compatibility to the MSP 34x0D is  
required. Using the STANDARD SELECTION  
register together with the MODUS register pro-  
vides a more economic way to program the  
MSP 34x0G.  
As soon as this register is applied, the MSP 34x0G  
works in the MSP 34x0D Manual/Compatibility  
Mode. In this mode, BTSC, EIA-J, and FM-Radio are  
disabled. Only MSP 34x0D features are available; the  
use of MODUS and STATUS register is not allowed.  
The MSP 34x0G is reset to the normal mode by first  
programming the MODUS register, followed by trans-  
mitting a valid standard code to the STANDARD  
SELECTION register.  
The register ‘MODE_REG’ contains the control bits  
determining the operation mode of the MSP 34x0G in  
the MSP 34x0D Manual/Compatibility Mode; Table 6–  
12 explains all bit positions.  
Micronas  
May 27, 2003; 6251-476-1DS  
93