HAL815
ADVANCE INFORMATION
1.3. Marking Code
1.6. Solderability
The HAL 815 has a marking on the package surface
(branded side). This marking includes the name of the
sensor and the temperature range.
Package TO-92UT: according to IEC68-2-58
During soldering reflow processing and manual
reworking, a component body temperature of 260 °C
should not be exceeded.
Type
Temperature Range
K
Components stored in the original packaging should
provide a shelf life of at least 12 months, starting from
the date code printed on the package labels, even in
environments as extreme as 40 °C and 90% relative
humidity.
A
E
HAL 815
815A
815K
815E
1.4. Operating Junction Temperature Range (TJ)
1.7. Pin Connections and Short Descriptions
The Hall sensors from Micronas are specified to the
chip temperature (junction temperature TJ).
Pin
No.
Pin Name Type
Short Description
A: T = −40 °C to +170 °C
J
K: T = −40 °C to +140 °C
J
1
VDD
IN
Supply Voltage and
Programming Pin
E: T = −40 °C to +100 °C
J
The relationship between ambient temperature (TA)
and junction temperature is explained in Section 4.5.
on page 18.
2
3
GND
OUT
Ground
OUT
Push Pull Output
and Selection Pin
1.5. Hall Sensor Package Codes
1
V
DD
HALXXXPA-T
Temperature Range: A, K, or E
Package: UT for TO-92UT
Type: 815
OUT
3
Example: HAL815UT-K
2
GND
→ Type:
→ Package:
815
TO-92UT
Fig. 1–1: Pin configuration
→ Temperature Range: TJ = −40°C to +140°C
Hall sensors are available in a wide variety of packag-
ing versions and quantities. For more detailed informa-
tion, please refer to the brochure: “Ordering Codes for
Hall Sensors”.
4
Micronas
MICRONAS [ MICRONAS ]
