DATA SHEET
HAL 525, HAL 526
1.5. Hall Sensor Package Codes
HALXXXPA-T
Temperature Range: K or E
Package: SF for SOT89B-1
UA for TO92UA
Type: 526
Example:
HAL526UA-E
→
Type: 526
→
Package: TO92UA
→
Temperature Range: T
J
=
−40 °C
to +100
°C
Hall sensors are available in a wide variety of packag-
ing versions and quantities. For more detailed informa-
tion, please refer to the brochure: “Hall Sensors:
Ordering Codes, Packaging, Handling”.
1.6. Solderability and Welding
During soldering reflow processing and manual
reworking, a component body temperature of 260 C
should not be exceeded.
Welding
Device terminals should be compatible with laser and
resistance welding. Please note that the success of
the welding process is subject to different welding
parameters which will vary according to the welding
technique used. A very close control of the welding
parameters is absolutely necessary in order to reach
satisfying results. Micronas, therefore, does not give
any implied or express warranty as to the ability to
weld the component.
1.7. Pin Connections
1 V
DD
3
OUT
2 GND
Fig. 1–1:
Pin configuration
Micronas
Nov. 30, 2009; DSH000144_003EN
5
MICRONAS [ MICRONAS ]
