HAL1xy
2.2. Positions of Sensitive Areas
SOT89B-3
y
A4
0.95 mm nominal
0.33 mm nominal
TO92UA-6
1.08 mm nominal
0.30 mm nominal
DATA SHEET
2.3. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this high-impedance circuit.
All voltages listed are referenced to ground (GND).
Symbol
V
DD
V
O
I
O
T
J
1)
2)
Parameter
Supply Voltage
Output Voltage
Continuous Output On Current
Junction Temperature Range
Pin Name
1
3
3
Min.
−15
−0.3
−
−40
Max.
28
1)
28
1)
50
1)
140
2)
Unit
V
V
mA
°C
as long as T
J
max is not exceeded
t < 1000 h
2.4. Recommended Operating Conditions
Functional operation of the device beyond those indicated in the “Recommended Operating Conditions/Characteris-
tics” is not implied and may result in unpredictable behavior, reduce reliability and lifetime of the device.
All voltages listed are referenced to ground (GND).
Symbol
V
DD
I
O
V
O
Parameter
Supply Voltage
Continuous Output on Current
Output Voltage
(output switched off)
Pin Name
1
3
3
Min.
3.8
0
0
Max.
24
20
24
Unit
V
mA
V
Comment
8
April 8, 2009; DSH000150_001EN
Micronas