HAL1xy
DATA SHEET
2.2. Positions of Sensitive Areas
SOT89B-3
TO92UA-6
y
0.95 mm nominal
0.33 mm nominal
1.08 mm nominal
0.30 mm nominal
A4
2.3. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this high-impedance circuit.
All voltages listed are referenced to ground (GND).
Symbol
VDD
VO
Parameter
Pin Name
Min.
−15
−0.3
−
Max.
281)
Unit
V
Supply Voltage
1
3
3
Output Voltage
281)
V
IO
Continuous Output On Current
Junction Temperature Range
501)
mA
°C
TJ
−40
1402)
1) as long as TJmax is not exceeded
2) t < 1000 h
2.4. Recommended Operating Conditions
Functional operation of the device beyond those indicated in the “Recommended Operating Conditions/Characteris-
tics” is not implied and may result in unpredictable behavior, reduce reliability and lifetime of the device.
All voltages listed are referenced to ground (GND).
Symbol
VDD
IO
Parameter
Pin Name
Min.
3.8
0
Max.
24
Unit
V
Comment
Supply Voltage
1
3
3
Continuous Output on Current
20
mA
V
VO
Output Voltage
0
24
(output switched off)
8
April 8, 2009; DSH000150_001EN
Micronas
MICRONAS [ MICRONAS ]
