DATA SHEET
HAL1xy
Hall Sensor Package Codes
HALXXXPA-T
Temperature Range:
I
Package: TQ for SOT89B-3
JQ for TO92UA-6
1.2. Marking Code
All Hall sensors have a marking on the package
surface (branded side). This marking includes the
name of the sensor and the temperature range.
Type
I
HAL101
HAL102
HAL103
HAL104
HAL106
HAL107
HAL108
HAL109
101I
102I
103I
104I
106I
107I
108I
109I
Temperature Range
C
101C
102C
103C
104C
106C
107C
108C
109C
Type: 1xy
Example:
HAL102JQ-I
→
Type: 102
→
Package: TO92UA-6
→
Temperature Range: T
J
=
−20 °C
to +125
°C
Hall sensors are available in a wide variety of packag-
ing versions and quantities. For more detailed informa-
tion, please refer to the brochure: “Hall Sensors.
Ordering Codes, Packaging, Handling”.
1.4. Solderability and Welding
Soldering
During soldering reflow processing and manual
reworking, a component body temperature of 260
°C
should not be exceeded.
1.3. Operating Junction Temperature Range
The Hall sensors from Micronas are specified to the
chip temperature (junction temperature T
J
).
I:
T
J
=
−20 °C
to +125
°C
C:
T
J
= 0
°C
to +85
°C
Welding
Device terminals shall be compatible with laser and
electrical welding. Please, note that the success of the
welding process is subject to different welding parame-
ters which will vary according to the welding technique
used. A very close control of the welding parameters is
absolutely necessary in order to reach satisfying
results. Micronas, therefore, does not give any implied
or express warranty as to the ability to weld the com-
ponent.
1 V
DD
3
OUT
2, 4 GND
Fig. 1–1:
Pin configuration
Micronas
April 8, 2009; DSH000150_001EN
5
MICRONAS [ MICRONAS ]
