256Mb and 512Mb (256Mb/256Mb), P30-65nm
Flowcharts
Figure 24: OTP Register Programming Procedure
Start
OTP Program Setup
- Write 0xC0
- OTP Address
Confirm Data
- Write OTP Address and Data
Check Ready Status
- READ STATUS REGISTER
command not required
- Perform READ operation
- Read ready status on SR7
No
SR7 = 1?
Yes
Read Status Register
- Toggle CE# or OE#
to update status register
- See Status Register Flowchart
End
PDF: 09005aef84566799
p30_65nm_MLC_256Mb-512mb.pdf - Rev. C 12/13 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
75