欢迎访问ic37.com |
会员登录 免费注册
发布采购

N25Q512A13GF840E 参数 Datasheet PDF下载

N25Q512A13GF840E图片预览
型号: N25Q512A13GF840E
PDF下载: 下载PDF文件 查看货源
内容描述: 美光的串行NOR闪存3V ,多个I / O, 4KB扇区擦除N25Q512A [Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q512A]
分类和应用: 闪存
文件页数/大小: 91 页 / 1214 K
品牌: MICRON [ MICRON TECHNOLOGY ]
 浏览型号N25Q512A13GF840E的Datasheet PDF文件第65页浏览型号N25Q512A13GF840E的Datasheet PDF文件第66页浏览型号N25Q512A13GF840E的Datasheet PDF文件第67页浏览型号N25Q512A13GF840E的Datasheet PDF文件第68页浏览型号N25Q512A13GF840E的Datasheet PDF文件第70页浏览型号N25Q512A13GF840E的Datasheet PDF文件第71页浏览型号N25Q512A13GF840E的Datasheet PDF文件第72页浏览型号N25Q512A13GF840E的Datasheet PDF文件第73页  
512Mb, Multiple I/O Serial Flash Memory  
ONE-TIME PROGRAMMABLE Operations  
PROGRAM OTP ARRAY programs, at most, 64 bytes to the OTP memory area and one  
OTP control byte. When the operation is in progress, the write in progress bit is set to 1.  
The write enable latch bit is cleared to 0, whether the operation is successful or not, and  
the status register and flag status register can be polled for the operation status. When  
the operation completes, the write in progress bit is cleared to 0.  
If the operation times out, the write enable latch bit is reset and the program fail bit is  
set to 1. If S# is not driven HIGH, the command is not executed, flag status register error  
bits are not set, and the write enable latch remains set to 1. The operation is considered  
complete once bit 7 of the flag status register outputs 1 with at least one byte output.  
The OTP control byte (byte 64) is used to permanently lock the OTP memory array.  
Table 30: OTP Control Byte (Byte 64)  
Bit Name  
OTP control byte  
Settings  
Description  
0
0 = Locked  
1 = Unlocked (Default)  
Used to permanently lock the 64-byte OTP array. When bit 0 = 1,  
the 64-byte OTP array can be programmed. When bit 0 = 0, the  
64-byte OTP array is read only.  
Once bit 0 has been programmed to 0, it can no longer be  
changed to 1. Program OTP array is ignored, the write enable  
latch bit remains set, and flag status register bits 1 and 4 are set.  
Figure 36: PROGRAM OTP Command  
Extended  
0
7
8
Cx  
C
LSB  
A[MIN]  
LSB  
DIN  
DIN  
DIN  
DIN  
DIN  
DIN  
DIN  
DIN  
DIN  
DQ[0]  
Command  
MSB  
A[MAX]  
MSB  
Dual  
0
3
4
Cx  
C
LSB  
A[MIN]  
LSB  
DIN  
DIN  
DIN  
DIN  
DIN  
DQ[1:0]  
Command  
MSB  
A[MAX]  
MSB  
Quad  
0
1
2
Cx  
C
LSB  
A[MIN]  
LSB  
DIN  
DIN  
DIN  
DQ[3:0]  
Command  
MSB  
A[MAX]  
MSB  
1. For extended SPI protocol, Cx = 7 + (A[MAX] + 1).  
For dual SPI protocol, Cx = 3 + (A[MAX] + 1)/2.  
For quad SPI protocol, Cx = 1 + (A[MAX] + 1)/4.  
Note:  
PDF: 09005aef84752721  
n25q_512mb_1ce_3V_65nm.pdf - Rev. O 05/13 EN  
Micron Technology, Inc. reserves the right to change products or specifications without notice.  
69  
© 2011 Micron Technology, Inc. All rights reserved.  
 复制成功!