M58BW016DT, M58BW016DB, M58BW016FT, M58BW016FB
Table 31. Document revision history (continued)
Revision history
Date
Version
Changes
LBGA80 package added (see Figure 21 and Table 24).
M58BW016FT and M58BW016FB behavior in Burst mode specified
under Section 3.2.1: Synchronous burst read.
I
, I
and I
current values specified for M58BW016FT and
DDB DD1
DD4
M58BW016FB in Table 15: DC characteristics, I
added.
DD5
09-Nov-2006
12
t
specified for M58BW016FT and M58BW016FB in Table 22:
VDHPH
Reset, power-down and power-up AC characteristics.
t
specified for M58BW016FT and M58BW016FB in Table 20:
KHQX
Synchronous burst read AC characteristics.
23h-24h reserved in Table 28: CFI - device voltage and timing
specification. 3Fh reserved in Table 30: Extended query information.
I
current specified for M58BW016DT/B and M58BW016FT/B in
DD
24-Nov-2006
05-Oct-2007
13
14
Table 15: DC characteristics.
Table 7: Burst configuration register and Table 22: Reset, power-down
and power-up AC characteristics updated.
Modified values for t
in Table 20: Synchronous burst read AC
LLKH
characteristics.
Figure 17: Reset, power-down and power-up AC waveforms - control
pins low updated and Figure 18: Reset, power-down and power-up AC
waveforms - control pins toggling added.
Small text changes.
Added: Figure 19: Power supply slope specification and Table 21: Power
supply AC and DC characteristics.
16-Jan-2008
15
Changed mechanical data of the LBGA package and the description for
the 010 value of M13 M11 bits in Table 7: Burst configuration register.
Minor text changes.
Added: information on data retention and reliability level on page 1, note
3 below Table 7: Burst configuration register, and note 1, 2, 3 below
Figure 13: Synchronous burst read (data valid from ‘n’ clock rising edge).
Modified: note 2 below Table 7: Burst configuration register and
Table 25: Ordering information scheme.
12-Mar-2008
26-Mar-2008
16
17
Minor text changes.
Applied Numonyx branding.
On cover page, revised from “WP pin for write protect of the 4 outermost
parameter blocks and all main blocks” to “WP pin for write protect of the
2 outermost parameter blocks and all main blocks”
In Table 20.: Synchronous burst read AC characteristics, revised tKHQX
(M58BW016FT/B) values from 2 to 3.
8-July-2011
18
In Table 21.: Power supply AC and DC characteristics, revised tVDH
value from 300 to 50
In Table 22.: Reset, power-down and power-up AC characteristics,
added tPLRH.
69/70
MICRON [ MICRON TECHNOLOGY ]
