Micron M25P40 Serial Flash Embedded Memory
WRITE DISABLE
WRITE DISABLE
The WRITE DISABLE command resets the write enable latch (WEL) bit.
The WRITE DISABLE command is entered by driving chip select (S#) LOW, sending the
command code, and then driving S# HIGH.
The WEL bit is reset under the following conditions:
• Power-up
• Completion of any ERASE operation
• Completion of any PROGRAM operation
• Completion of any WRITE REGISTER operation
• Completion of WRITE DISABLE operation
Figure 8: WRITE DISABLE Command Sequence
0
1
2
3
4
5
6
7
C
S#
Command Bits
LSB
DQ[0]
DQ1
0
0
0
0
0
1
0
0
MSB
High-Z
Don’t Care
PDF: 09005aef8456654f
m25p40.pdf - Rev. Y 8/12 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
19
© 2011 Micron Technology, Inc. All rights reserved.