M25P128
Signal description
2.6
Write protect/enhanced program supply voltage (W/V
PP
)
W/V
PP
is both a control input and a power supply pin. The two functions are selected by the
voltage range applied to the pin.
If the W/V
PP
input is kept in a low voltage range (0V to V
CC
) the pin is seen as a control
input. This input signal is used to freeze the size of the area of memory that is protected
against program or erase instructions (as specified by the values in the BP2, BP1 and BP0
bits of the Status Register).
If V
PP
is in the range of V
PPH
it acts as an additional power supply pin. In this case V
PP
must
be stable until the Program/Erase algorithm is completed.
2.7
V
CC
supply voltage
V
CC
is the supply voltage.
2.8
V
SS
ground
V
SS
is the reference for the V
CC
supply voltage.
9/47
MICRON [ MICRON TECHNOLOGY ]
