32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash
Absolute Ratings and Operating Conditions
Absolute Ratings and Operating Conditions
Stresses greater than those listed may cause permanent damage to the device. This is a
stress rating only, and functional operation of the device at these or any other condi-
tions outside those indicated in the operational sections of this specification is not im-
plied. Exposure to absolute maximum rating conditions for extended periods may ad-
versely affect reliability.
Table 31: Absolute Maximum/Minimum Ratings
Parameter
Symbol
TBIAS
TSTG
Min
–40
–65
–0.6
–2
Max
85
Units
°C
°C
V
Notes
Temperature under bias
Storage temperature
Input/output voltage
Supply voltage
125
VIO
VCC + 0.6
5.6
1, 2
1, 2
VCC
V
Input/output supply voltage
Program voltage
VCCQ
VPPH
–2
5.6
V
1, 2
–2
14.5
V
1, 2, 3
1. During signal transitions, minimum voltage may undershoot to −2V during periods less
than 20ns.
Notes:
2. During signal transitions, maximum voltage may overshoot to VCC + 2V for periods less
than 20ns.
3. VPPH must not remain at 12V for more than 80 hours cumulative.
Table 32: Operating Conditions
Parameter
Symbol
Min
2.7
Max
3.6
Unit
V
Supply voltage
VCC
VCCQ
VPP
TA
CL
Input/output supply voltage (VCCQ ≤ VCC
Program voltage
)
1.65
–0.6
–40
3.6
V
12.5
85
V
Ambient operating temperature
Load capacitance
°C
pF
ns
V
30
Input rise and fall times
Input pulse voltages
–
–
2.5
–
0 to VCCQ
VCCQ/2
Input and output timing reference voltages
–
V
PDF: 09005aef84dc44a7
m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
66
© 2012 Micron Technology, Inc. All rights reserved.