256Mb, 512Mb, 1Gb, 2Gb: 3V Embedded Parallel NOR Flash
Power-Up and Reset Characteristics
Power-Up and Reset Characteristics
Table 22: Power-Up Specifications
Symbol
Parameter
Legacy
JEDEC
Min
0
Unit
µs
Notes
VCC HIGH to VCCQ HIGH
–
tVCHVCQH
tVCHPH
tVCQHPH
tPHEL
1
2
2
VCC HIGH to rising edge of RST#
VCCQ HIGH to rising edge of RST#
RST# HIGH to chip enable LOW
RST# HIGH to write enable LOW
tVCS
tVIOS
tRH
300
0
µs
µs
50
ns
–
tPHWL
150
ns
1. VCC and VCCQ ramps must be synchronized during power-up.
Notes:
2. If RST# is not stable for tVCS or tVIOS, the device will not allow any READ or WRITE oper-
ations, and a hardware reset is required.
Figure 13: Power-Up Timing
tVCHVCQH
VCC
VCCQ
tRH
CE#
tVIOS
RST#
tVCS
WE#
tPHWL
PDF: 09005aef849b4b09
m29ew_256mb_2gb.pdf - Rev. B 8/12 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
53
© 2012 Micron Technology, Inc. All rights reserved.