A-XD-1W25&B-XD-1W25
Series
Specifications
Input Voltage
Input Filter
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
Ripple and Noise (20MHz limited)
Efficiency at Full Load
Isolation Voltage
Isolation Resistance (Viso = 500VDC)
Isolation Capacitance
Short Circuit Protection
Switching Frequency at Full Load
Operating Temperature
Storage Temperature
Package Weight
Single output types
Dual output types
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
±10%
Capacitor Type
±5%
1,2%/1% V Input
20% max.
15% max.
10% max.
100mVp-p max.
70% min.
1.000VDC min.
(also available with 2.000VDC)
10 GΩmin.
30pF min./80pF max.
1 Second
100kHz typ.
–40°C to +85°C (see Graph)
-55°C to +125°C
1.8g
1.9g
OUTLINE DIMENSIONS
&
FOOTPRINT DETAILS
MECHANICAL DIMENSIONS
8 PIN DIP Package
Pin
1
4
5
6
8
FOOTPRINT DETAILS
Single
Function
Pin
1
4
5
6
8
Dual
Function
-Vin
+Vin
+Vout
NC
-Vout
-Vin
+Vin
+Vout
Com
-Vout
NC:no connect
Specif cations can be changed any time without notice.
No parallel connection or plug and play.
Note:
1. The load shouldn't be less than 10%, otherwise ripple will increase dramatically.
2. Operation under 10% load will not damage the converter; However, they may not meet all specification listed.
3. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless
otherwise specified.
4. In this data sheet, all the test methods of indications are based on corporate standards.
All dimensions in inches ±0.01(mm±0.25mm).All pins on a 0.1(2.54) pitch and within ±0.01(0.25)of true position.
0.01(mm
±
Weight: 1.48g (DIP)1.30g (SIP)
Recommended footprint details
TUBE OUTLINE DIMENSIONS
8 PIN DIP Tube
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 3 of 3