欢迎访问ic37.com |
会员登录 免费注册
发布采购

PIC32MX130F064D 参数 Datasheet PDF下载

PIC32MX130F064D图片预览
型号: PIC32MX130F064D
PDF下载: 下载PDF文件 查看货源
内容描述: 32位微控制器(高达128 KB的闪存和32 KB SRAM)与音频和图形接口, USB接口,以及高级模拟 [32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog]
分类和应用: 闪存微控制器静态存储器
文件页数/大小: 320 页 / 6070 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号PIC32MX130F064D的Datasheet PDF文件第175页浏览型号PIC32MX130F064D的Datasheet PDF文件第176页浏览型号PIC32MX130F064D的Datasheet PDF文件第177页浏览型号PIC32MX130F064D的Datasheet PDF文件第178页浏览型号PIC32MX130F064D的Datasheet PDF文件第180页浏览型号PIC32MX130F064D的Datasheet PDF文件第181页浏览型号PIC32MX130F064D的Datasheet PDF文件第182页浏览型号PIC32MX130F064D的Datasheet PDF文件第183页  
PIC32MX1XX/2XX  
The primary features of the UART module are:  
18.0 UNIVERSAL ASYNCHRONOUS  
RECEIVER TRANSMITTER  
(UART)  
• Full-duplex, 8-bit or 9-bit data transmission  
• Even, Odd or No Parity options (for 8-bit data)  
• One or two Stop bits  
Note 1: This data sheet summarizes the features  
of the PIC32MX1XX/2XX family of  
devices. It is not intended to be a  
comprehensive reference source. To  
complement the information in this data  
sheet, refer to Section 21. “Universal  
Asynchronous Receiver Transmitter  
(UART)” (DS61107) in the “PIC32 Family  
Reference Manual”, which is available  
• Hardware auto-baud feature  
• Hardware flow control option  
• Fully integrated Baud Rate Generator (BRG) with  
16-bit prescaler  
• Baud rates ranging from 38 bps to 10 Mbps at 40  
MHz  
• 8-level deep First-In-First-Out (FIFO) transmit  
data buffer  
from  
the  
Microchip  
web  
site  
• 8-level deep FIFO receive data buffer  
(www.microchip.com/PIC32).  
• Parity, framing and buffer overrun error detection  
2: Some registers and associated bits  
described in this section may not be  
available on all devices. Refer to  
Section 4.0 “Memory Organization” in  
this data sheet for device-specific register  
and bit information.  
• Support for interrupt-only on address detect  
(9th bit = 1)  
• Separate transmit and receive interrupts  
• Loopback mode for diagnostic support  
• LIN Protocol support  
• IrDA encoder and decoder with 16x baud clock  
output for external IrDA encoder/decoder support  
The UART module is one of the serial I/O modules  
available in PIC32MX1XX/2XX family devices. The  
UART is a full-duplex, asynchronous communication  
channel that communicates with peripheral devices  
and personal computers through protocols, such as  
RS-232, RS-485, LIN and IrDA®. The module also sup-  
ports the hardware flow control option, with UxCTS and  
UxRTS pins, and also includes an IrDA encoder and  
decoder.  
Figure 18-1 illustrates a simplified block diagram of the  
UART.  
FIGURE 18-1:  
UART SIMPLIFIED BLOCK DIAGRAM  
Baud Rate Generator  
IrDA®  
UxRTS/BCLKx  
UxCTS  
Hardware Flow Control  
UARTx Receiver  
UxRX  
UxTX  
UARTx Transmitter  
Note:  
Not all pins are available for all UART modules. Refer to the device-specific pin diagram for more information.  
© 2011-2012 Microchip Technology Inc.  
Preliminary  
DS61168D-page 179