PIC18F97J60 FAMILY
27.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
Ambient temperature under bias.............................................................................................................-40°C to +100°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on any digital only input pin or MCLR with respect to V
SS
(except V
DD
) ........................................ -0.3V to 6.0V
Voltage on any combined digital and analog pin with respect to V
SS
............................................. -0.3V to (V
DD
+ 0.3V)
Voltage on V
DDCORE
with respect to V
SS
................................................................................................... -0.3V to 2.75V
Voltage on V
DD
with respect to V
SS
........................................................................................................... -0.3V to 4.0V
Total power dissipation
(Note 1)
...............................................................................................................................1.0W
Maximum current out of V
SS
pin ...........................................................................................................................300 mA
Maximum current into V
DD
pin ..............................................................................................................................250 mA
Input clamp current, I
IK
(V
I
< 0 or V
I
> V
DD
)
(Note 2)........................................................................................................
±0
mA
Output clamp current, I
OK
(V
O
< 0 or V
O
> V
DD
)
(Note 2)
................................................................................................ ±0
mA
Maximum output current sunk by any PORTB and PORTC I/O pins......................................................................25 mA
Maximum output current sunk by any PORTD, PORTE and PORTJ I/O pins ..........................................................8 mA
Maximum output current sunk by any PORTA, PORTF, PORTG and PORTH I/O pins
(Note 3)
.............................2 mA
Maximum output current sourced by any PORTB and PORTC I/O pins.................................................................25 mA
Maximum output current sourced by any PORTD, PORTE and PORTJ I/O pins .....................................................8 mA
Maximum output current sourced by any PORTA, PORTF, PORTG and PORTH I/O pins
(Note 3)
........................2 mA
Maximum current sunk by all ports combined.......................................................................................................200 mA
Maximum current sourced by all ports combined..................................................................................................200 mA
Note 1:
Power dissipation is calculated as follows:
Pdis = V
DD
x {I
DD
–
∑
I
OH
} +
∑
{(V
DD
– V
OH
) x I
OH
} +
∑
(V
OL
x I
OL
) +
∑
(V
TPOUT
x I
TPOUT
)
2:
No clamping diodes are present.
3:
Exceptions are RA<1> and RA<0>, which are capable of directly driving LEDs up to 25 mA.
†
NOTICE:
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
©
2009 Microchip Technology Inc.
DS39762E-page 417
MICROCHIP [ MICROCHIP TECHNOLOGY ]
