PIC18F2420/2520/4420/4520
RRNCF
Rotate Right f (No Carry)
SETF
Set f
Syntax:
RRNCF f {,d {,a}}
Syntax:
SETF f {,a}
Operands:
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
Operands:
0 ≤ f ≤ 255
a ∈ [0,1]
Operation:
FFh → f
Operation:
(f<n>) → dest<n – 1>,
(f<0>) → dest<7>
Status Affected:
Encoding:
None
0110
100a
ffff
ffff
Status Affected:
Encoding:
N, Z
Description:
The contents of the specified register
are set to FFh.
0100
00da
ffff
ffff
Description:
The contents of register ‘f’ are rotated
one bit to the right. If ‘d’ is ‘0’, the result
is placed in W. If ‘d’ is ‘1’, the result is
placed back in register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank will be
selected, overriding the BSR value. If ‘a’
is ‘1’, then the bank will be selected as
per the BSR value (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 24.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 24.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words:
Cycles:
1
1
Q Cycle Activity:
Q1
Q2
Q3
Q4
register f
Decode
Read
register ‘f’
Process
Data
Write
register ‘f’
Words:
Cycles:
1
1
Example:
SETF
REG, 1
Q Cycle Activity:
Q1
Before Instruction
REG
After Instruction
REG
=
=
5Ah
FFh
Q2
Q3
Q4
Decode
Read
register ‘f’
Process
Data
Write to
destination
Example 1:
RRNCF
REG, 1, 0
Before Instruction
REG
After Instruction
REG
=
1101 0111
1110 1011
RRNCF REG, 0, 0
=
Example 2:
Before Instruction
W
REG
=
=
?
1101 0111
After Instruction
W
REG
=
=
1110 1011
1101 0111
© 2008 Microchip Technology Inc.
DS39631E-page 301
MICROCHIP [ MICROCHIP ]
