PIC18F45J10 FAMILY
24.3 DC Characteristics: PIC18F45J10 Family (Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
DC CHARACTERISTICS
Param
Symbol
No.
Characteristic
Min
Max
Units
Conditions
VIL
Input Low Voltage
All I/O Ports:
with TTL Buffer
D030
D030A
D031
D032
D033
D033A
VSS
—
0.15 VDD
0.8
V
V
V
V
V
V
VDD < 3.3V
3.3V ≤ VDD ≤ 3.6V
with Schmitt Trigger Buffer
MCLR
VSS
VSS
VSS
VSS
0.2 VDD
0.2 VDD
0.3 VDD
0.2 VDD
OSC1
OSC1
HS, HSPLL modes
EC, ECPLL modes(1)
D034
T1CKI
VSS
0.3
V
VIH
Input High Voltage
I/O Ports with non 5.5V
Tolerance:(4)
D040
D040A
D041
with TTL Buffer
0.25 VDD + 0.8V
2.0
VDD
VDD
VDD
V
V
V
VDD < 3.3V
3.3V ≤ VDD ≤ 3.6V
with Schmitt Trigger Buffer
0.8 VDD
I/O Ports with 5.5V
Tolerance:(4)
Dxxx
with TTL Buffer
0.25 VDD + 0.8V
2.0
5.5
5.5
V
V
V
V
V
V
VDD < 3.3V
DxxxA
Dxxx
3.3V ≤ VDD ≤ 3.6V
with Schmitt Trigger Buffer
0.8 VDD
0.8 VDD
0.7 VDD
0.8 VDD
5.5
D042
D043
D043A
MCLR
OSC1
OSC1
VDD
VDD
VDD
HS, HSPLL modes
EC, ECPLL modes
D044
T1CKI
1.6
VDD
V
IIL
Input Leakage Current(2,3)
D060
I/O Ports with non 5.5V
Tolerance(4)
—
—
±0.2
±0.2
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
D060A
I/O Ports with 5.5V
Tolerance(4)
μA VSS ≤ VPIN ≤ 5.5V,
Pin at high-impedance
D061
D063
MCLR
—
—
±0.2
±0.2
μA Vss ≤ VPIN ≤ VDD
μA Vss ≤ VPIN ≤ VDD
OSC1
IPU
Weak Pull-up Current
PORTB Weak Pull-up Current
D070
IPURB
30
240
μA VDD = 3.3V, VPIN = VSS
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Refer to Table 10-2 for the pins that have corresponding tolerance limits.
© 2009 Microchip Technology Inc.
DS39682E-page 313