PIC16F913/914/916/917/946
3.6.1
PIN DESCRIPTIONS AND
DIAGRAMS
3.6.1.7
RD6/SEG19
Figure 3-25 shows the diagram for this pin. The RD6
pin is configurable to function as one of the following:
Each PORTD pin is multiplexed with other functions. The
pins and their combined functions are briefly described
here. For specific information about individual functions
such as the Comparator or the ADC, refer to the
appropriate section in this data sheet.
• a general purpose I/O
• an analog output for the LCD
3.6.1.8
RD7/SEG20
Figure 3-25 shows the diagram for this pin. The RD7
pin is configurable to function as one of the following:
3.6.1.1
RD0/COM3
Figure 3-22 shows the diagram for this pin. The RD0
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
• a general purpose I/O
• an analog output for the LCD
3.6.1.2
RD1
Figure 3-23 shows the diagram for this pin. The RD1
pin is configurable to function as one of the following:
• a general purpose I/O
3.6.1.3
RD2/CCP2
Figure 3-24 shows the diagram for this pin. The RD2
pin is configurable to function as one of the following:
• a general purpose I/O
• a Capture input, Compare output or PWM output
3.6.1.4
RD3/SEG16
Figure 3-25 shows the diagram for this pin. The RD3
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.6.1.5
RD4/SEG17
Figure 3-25 shows the diagram for this pin. The RD4
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
3.6.1.6
RD5/SEG18
Figure 3-25 shows the diagram for this pin. The RD5
pin is configurable to function as one of the following:
• a general purpose I/O
• an analog output for the LCD
DS41250F-page 72
© 2007 Microchip Technology Inc.