PIC16F631/677/685/687/689/690
REGISTER 8-1:
CM1CON0: COMPARATOR C1 CONTROL REGISTER 0
R/W-0
C1ON
R-0
R/W-0
C1OE
R/W-0
U-0
—
R/W-0
C1R
R/W-0
R/W-0
C1OUT
C1POL
C1CH1
C1CH0
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
bit 7
bit 6
C1ON: Comparator C1 Enable bit
1= Comparator C1 is enabled
0= Comparator C1 is disabled
C1OUT: Comparator C1 Output bit
If C1POL = 1(inverted polarity):
C1OUT = 0when C1VIN+ > C1VIN-
C1OUT = 1when C1VIN+ < C1VIN-
If C1POL = 0(non-inverted polarity):
C1OUT = 1when C1VIN+ > C1VIN-
C1OUT = 0when C1VIN+ < C1VIN-
bit 5
bit 4
C1OE: Comparator C1 Output Enable bit
1= C1OUT is present on the C1OUT pin(1)
0= C1OUT is internal only
C1POL: Comparator C1 Output Polarity Select bit
1= C1OUT logic is inverted
0= C1OUT logic is not inverted
bit 3
bit 2
Unimplemented: Read as ‘0’
C1R: Comparator C1 Reference Select bit (non-inverting input)
1= C1VIN+ connects to C1VREF output
0= C1VIN+ connects to C1IN+ pin
bit 1-0
C1CH<1:0>: Comparator C1 Channel Select bit
00= C1VIN- of C1 connects to C12IN0- pin
01= C1VIN- of C1 connects to C12IN1- pin
10= C1VIN- of C1 connects to C12IN2- pin
11= C1VIN- of C1 connects to C12IN3- pin
Note 1: Comparator output requires the following three conditions: C1OE = 1, C1ON = 1and corresponding
PORT TRIS bit = 0.
DS41262D-page 98
© 2007 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
