PIC16C5X
PIC16CR54A
13.4
DC Characteristics: PIC16CR54A-04, 10, 20, PIC16LCR54A-04 (Commercial)
PIC16CR54A-04I, 10I, 20I, PIC16LCR54A-04I (Industrial)
Standard Operating Conditions (unless otherwise specified)
DC Characteristics
All Pins Except
Power Supply Pins
Operating Temperature
0°C ≤ TA ≤ +70°C (commercial)
–40°C ≤ TA ≤ +85°C (industrial)
Operating Voltage VDD range is described in Section 13.1 and Section 13.3.
(1)
Characteristic
Sym
Min
Typ
Max
Units
Conditions
Input Low Voltage
I/O ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
VIL
VSS
VSS
VSS
VSS
VSS
—
—
—
—
—
0.2 VDD
0.15 VDD
0.15 VDD
0.15 VDD
0.15 VDD
V
V
V
V
V
Pin at hi-impedance
(4)
RC option only
XT, HS and LP options
Input High Voltage
I/O ports
VIH
(5)
2.0
—
—
—
—
—
—
VDD
VDD
VDD
VDD
VDD
VDD
V
V
V
V
V
V
VDD = 3.0V to 5.5V
Full VDD range
(5)
0.6 VDD
0.85 VDD
0.85 VDD
0.85 VDD
0.85 VDD
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
OSC1
(4)
RC option only
XT, HS and LP options
Hysteresis of Schmitt
Trigger inputs
VHYS 0.15VDD*
—
—
V
(3)
Input Leakage Current
IIL
For VDD ≤ 5.5V
I/O ports
–1.0
+1.0
µA
VSS ≤ VPIN ≤ VDD,
Pin at hi-impedance
(2)
MCLR
–5.0
µA
µA
µA
µA
VPIN = VSS + 0.25V
(2)
0.5
0.5
0.5
+5.0
+3.0
+3.0
VPIN = VDD
T0CKI
OSC1
–3.0
–3.0
VSS ≤ VPIN ≤ VDD
VSS ≤ VPIN ≤ VDD,
XT, HS and LP options
Output Low Voltage
I/O ports
OSC2/CLKOUT
VOL
—
—
—
0.5
0.5
V
V
IOL = 10 mA, VDD = 6.0V
IOL = 1.9 mA, VDD = 6.0V,
RC option only
—
(3)
Output High Voltage
VOH
I/O ports
OSC2/CLKOUT
VDD –0.5
VDD –0.5
—
—
—
—
V
V
IOH = –4.0 mA, VDD = 6.0V
IOH = –0.8 mA, VDD = 6.0V,
RC option only
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25°C.This data is for design guidance
only and is not tested.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltage.
3: Negative current is defined as coming out of the pin.
4: For the RC option, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC16C5X
be driven with external clock in RC mode.
5: The user may use the better of the two specifications.
DS30453B-page 94
Preliminary
1998 Microchip Technology Inc.