PIC16CE62X
13.2
DC CHARACTERISTICS:
PIC16CE62X-04 (Commercial, Industrial, Extended)
PIC16CE62X-20 (Commercial, Industrial, Extended) (Cont.)
Standard Operating Conditions (unless otherwise stated)
Operating temperature –40˚C ≤ TA ≤ +85˚C for industrial and
0˚C ≤ TA ≤ +70˚C for commercial and
–40˚C ≤ TA ≤ +125˚C for extended
Operating voltage VDD range as described in DC spec Table 13-1 and Table 13-2
Parm Sym
Characteristic
Min
Typ†
Max
Unit
Conditions
No.
D090A
VDD-0.7
-
-
V
IOH=-2.5 mA,
VDD=4.5V, +125°C
D092
OSC2/CLKOUT (RC only)
VDD-0.7
VDD-0.7
-
-
-
-
V
V
V
IOH=-1.3 mA, VDD=4.5V, -40° to +85°C
IOH=-1.0 mA, VDD=4.5V, +125°C
RA4 pin
D150 VOD Open-Drain High Voltage
Capacitive Loading Specs
on Output Pins
10*
D100 COSC
2
OSC2 pin
15
50
pF In XT, HS and LP modes when external
clock used to drive OSC1.
D101
Cio
All I/O pins/OSC2 (in RC
mode)
pF
*
These parameters are characterized but not tested.
†
Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guid-
ance only and are not tested.
Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the
PIC16CE62X be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different
input voltages.
3: Negative current is defined as coming out of the pin.
4: The better of the two specifications may be used. For VIL, this would be the higher voltage and for
VIH, this would be the lower voltage.
1998 Microchip Technology Inc.
Preliminary
DS40182A-page 85
MICROCHIP [ MICROCHIP ]
