PIC16C9XX
8-Bit CMOS Microcontroller with LCD Driver
Devices included in this data sheet:
• PIC16C923
• PIC16C924
Available in Die Form
Microcontroller Core Features:
•
•
•
•
•
•
•
•
•
High performance RISC CPU
Only 35 single word instructions to learn
4K x 14 on-chip EPROM program memory
176 x 8 general purpose registers (SRAM)
All single cycle instructions (500 ns) except for
program branches which are two-cycle
Operating speed: DC - 8 MHz clock input
DC - 500 ns instruction cycle
Interrupt capability
Eight level deep hardware stack
Direct, indirect and relative addressing modes
Peripheral Features:
•
•
•
•
25 I/O pins with individual direction control
25-27 input only pins
Timer0: 8-bit timer/counter with 8-bit prescaler
Timer1: 16-bit timer/counter, can be incremented
during sleep via external crystal/clock
• Timer2: 8-bit timer/counter with 8-bit period regis-
ter, prescaler and postscaler
• One pin that can be configured a capture input,
PWM output, or compare output
- Capture is 16-bit, max. resolution 31.25 ns
- Compare is 16-bit, max. resolution 500 ns
- PWM max resolution is 10-bits.
Maximum PWM frequency @ 8-bit resolution
= 32 kHz, @ 10-bit resolution = 8 kHz
• Programmable LCD timing module
- Multiple LCD timing sources available
- Can drive LCD panel while in Sleep mode
- Static, 1/2, 1/3, 1/4 multiplex
- Static drive and 1/3 bias capability
- 16 bytes of dedicated LCD RAM
- Up to 32 segments, up to 4 commons
Common
1
2
3
4
Segment
32
31
30
29
Pixels
32
62
90
116
• Synchronous Serial Port (SSP) with SPI
™
and I
2
C
™
• 8-bit multi-channel Analog to Digital converter
(PIC16C924 only)
Special Microcontroller Features:
• Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC
oscillator for reliable operation
• Programmable code-protection
• Power saving SLEEP mode
• Selectable oscillator options
• In-Circuit Serial Programming™ (via two pins)
CMOS Technology
• Low-power, high-speed CMOS EPROM
technology
• Fully static design
• Wide operating voltage range: 2.5V to 6.0V
• Commercial and Industrial temperature ranges
• Low-power consumption:
- < 2 mA @ 5.5V, 4 MHz
- 22.5
µ
A typical @ 4V, 32 kHz
- < 1
µ
A typical standby current @ 3.0V
ICSP is a trademark of Microchip Technology Inc. I
2
C is a trademark of Philips Corporation. SPI is a trademark of Motorola Corporation.
©
1997 Microchip Technology Inc.
DS30444E - page 1
MICROCHIP [ MICROCHIP TECHNOLOGY ]
