PIC16F7X
M
28/40-Pin 8-Bit CMOS FLASH Microcontrollers
Devices Included in this Data Sheet:
Peripheral Features:
• Timer0: 8-bit timer/counter with 8-bit prescaler
• PIC16F73
• PIC16F74
• PIC16F76
• PIC16F77
• Timer1: 16-bit timer/counter with prescaler,
can be incremented during SLEEP via external
crystal/clock
High Performance RISC CPU:
• Timer2: 8-bit timer/counter with 8-bit period
register, prescaler and postscaler
• High performance RISC CPU
• Only 35 single word instructions to learn
• Two Capture, Compare, PWM modules
- Capture is 16-bit, max. resolution is 12.5 ns
- Compare is 16-bit, max. resolution is 200 ns
- PWM max. resolution is 10-bit
• All single cycle instructions except for program
branches which are two-cycle
• Operating speed: DC - 20 MHz clock input
DC - 200 ns instruction cycle
• 8-bit, up to 8-channel Analog-to-Digital converter
• Up to 8K x 14 words of FLASH Program Memory,
Up to 368 x 8 bytes of Data Memory (RAM)
• Synchronous Serial Port (SSP) with SPI (Master
mode) and I2C (Slave)
• Pinout compatible to the PIC16C73B/74B/76/77
• Pinout compatible to the PIC16F873/874/876/877
• Interrupt capability (up to 12 sources)
• Universal Synchronous Asynchronous Receiver
Transmitter (USART/SCI)
• Parallel Slave Port (PSP), 8-bits wide with
external RD, WR and CS controls (40/44-pin only)
• Eight level deep hardware stack
• Direct, Indirect and Relative Addressing modes
• Processor read access to program memory
• Brown-out detection circuitry for
Brown-out Reset (BOR)
Special Microcontroller Features:
CMOS Technology:
• Power-on Reset (POR)
• Low power, high speed CMOS FLASH technology
• Fully static design
• Power-up Timer (PWRT) and
Oscillator Start-up Timer (OST)
• Wide operating voltage range: 2.0V to 5.5V
• High Sink/Source Current: 25 mA
• Industrial temperature range
• Low power consumption:
• Watchdog Timer (WDT) with its own on-chip RC
oscillator for reliable operation
• Programmable code protection
• Power saving SLEEP mode
• Selectable oscillator options
- < 2 mA typical @ 5V, 4 MHz
- 20 µA typical @ 3V, 32 kHz
- < 1 µA typical standby current
• In-Circuit Serial Programming (ICSP) via two
pins
SSP
Program Memory
(# Single Word
Instructions)
Data
SRAM
(Bytes)
8-bit
A/D (ch) (PWM)
CCP
Timers
8/16-bit
Device
I/O
Interrupts
USART
2
SPI
I C
(Master) (Slave)
PIC16F73
PIC16F74
PIC16F76
PIC16F77
4096
4096
8192
8192
192
192
368
368
22
33
22
33
11
12
11
12
5
8
5
8
2
2
2
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2 / 1
2 / 1
2 / 1
2 / 1
2002 Microchip Technology Inc.
DS30325B-page 1
MICROCHIP [ MICROCHIP ]
