2.2.9
XTAL2
Output from the inverting Oscillator amplifier.
2.2.10
AVCC
AVCC is the supply voltage pin for Port A and the A/D Converter. It should be externally connected to V
CC
, even
if the ADC is not used. If the ADC is used, it should be connected to V
CC
through a low-pass filter.
2.2.11
AREF
AREF is the analog reference pin for the A/D Converter.
3.
Resources
A comprehensive set of development tools, application notes and datasheets are available for download on
http://www.atmel.com/avr.
Note:
1.
Data retention
4.
Data Retention
Reliability Qualification results show that the projected data retention failure rate is much less than 1 PPM over
20 years at 85°C or 100 years at 25°C.
5.
About Code Examples
This documentation contains simple code examples that briefly show how to use various parts of the device.
These code examples assume that the part specific header file is included before compilation. Be aware that not
all C Compiler vendors include bit definitions in the header files and interrupt handling in C is compiler
dependent. Please confirm with the C Compiler documentation for more details.
ATmega16A [DATASHEET]
Atmel-8154CS-8-bit-AVR-ATmega16A_Datasheet Summary-07/2014
7