11AAXXX/11LCXXX
2.0
2.1
FUNCTIONAL DESCRIPTION
Principles of Operation
The 11XX family of serial EEPROMs support the
UNI/O
®
protocol. They can be interfaced with
microcontrollers, including Microchip’s PIC
®
microcon-
trollers, ASICs, or any other device with an available
discrete I/O line that can be configured properly to
match the UNI/O protocol.
The 11XX devices contain an 8-bit instruction register.
The devices are accessed via the SCIO pin.
bytes and format for device operation. All instructions,
addresses, and data are transferred MSb first, LSb
last.
Data is embedded into the I/O stream through
Manchester encoding. The bus is controlled by a
master device which determines the clock period, con-
trols the bus access and initiates all operations, while
the 11XX works as slave. Both master and slave can
operate as transmitter or receiver, but the master
device determines which mode is active.
FIGURE 2-1:
STATUS
Register
BLOCK DIAGRAM
HV Generator
EEPROM
I/O Control
Logic
Memory
Control
Logic
X
Dec
Page Latches
Current-
Limited
Slope
Control
SCIO
Sense Amp.
R/W Control
Array
Y Decoder
Vcc
Vss
DS22067H-page 6
Preliminary
2010 Microchip Technology Inc.
MICROCHIP [ MICROCHIP TECHNOLOGY ]
