PRELIMINARY
ELECTRICAL TABLES
(Continued)
SYMBOL
PIN DIODE DRIVERS
VOUT
IOUT
High
Low
High
Low
VCC –0.3
0.3
10
–10
PARAMETER
CONDITIONS
MIN
TYP
ML2751
MAX
UNITS
V
mA
Note 1: Limits are guaranteed by 100% testing, sampling, or correlation with worst case test conditions.
Note 2: PA turn on is measured from the rising edge of either PAON or FEEN to 90% of the programmed power output.
Note 3: PA power measurements are made at the output of the external harmonic filter under the following conditions: 0dBm input drive at 915MHz; the resistor on
TPA is set for +20dBm ±0.5dB output power; the TPS signal is 1V.
January, 2000
PRELIMINARY DATASHEET
9
MICRO-LINEAR [ MICRO LINEAR CORPORATION ]
