欢迎访问ic37.com |
会员登录 免费注册
发布采购

MIC5190YMM 参数 Datasheet PDF下载

MIC5190YMM图片预览
型号: MIC5190YMM
PDF下载: 下载PDF文件 查看货源
内容描述: 超高速,大电流有源滤波器/ LDO控制器 [Ultra High-Speed, High-Current Active Filter/LDO Controller]
分类和应用: 有源滤波器控制器
文件页数/大小: 13 页 / 464 K
品牌: MICREL [ MICREL SEMICONDUCTOR ]
 浏览型号MIC5190YMM的Datasheet PDF文件第2页浏览型号MIC5190YMM的Datasheet PDF文件第3页浏览型号MIC5190YMM的Datasheet PDF文件第4页浏览型号MIC5190YMM的Datasheet PDF文件第5页浏览型号MIC5190YMM的Datasheet PDF文件第6页浏览型号MIC5190YMM的Datasheet PDF文件第7页浏览型号MIC5190YMM的Datasheet PDF文件第8页浏览型号MIC5190YMM的Datasheet PDF文件第9页  
MIC5190  
Ultra High-Speed, High-Current Active Filter/LDO Controller  
Features  
General Description  
• Input voltage range:  
The MIC5190 is an ultra high-speed linear regulator. It uses  
an external N-Channel FET as its power device.  
V
= 0.9V to 5.5V  
IN  
• +1.0% initial output tolerance  
Dropout down to 25mV@10A  
The MIC5190 offers ultra high-speed to cope with the fast  
load demands of microprocessor cores, ASICs, and other  
high-speeddevices.Signalbandwidthsofgreaterthan500kHz  
can be achieved with a minimum amount of capacitance  
while at the same time keeping the output voltage clean,  
regardless of load demand. A powerful output driver delivers  
large MOSFETs into their linear regions, achieving ultra-low  
dropout voltage.  
• Filters out switching frequency noise on input  
Very high large signal bandwidth >500kHz  
• PSRR >40dB at 500kHz  
• Adjustable output voltage down to 0.5V  
• Stable with any output capacitor  
• Excellent line and load regulation specifications  
• Logic controlled shutdown  
• Current limit protection  
1.25V ±10% can be turned into 0.9V ±1% without the use of  
IN  
a large amount of capacitance.  
• 3mm × 3mm 10-lead MLF™ and MSOP-10 packages  
• Available –40°C to +125°C junction temperature  
MIC5190 (0.5V reference) is optimized for output voltages of  
below 1.0V.  
The MIC5190 is offered in 10-lead 3mm × 3mm MLF™ and  
10-lead MSOP-10 packages and has an operating junction  
temperature range of –40°C to +125°C.  
Applications  
• Distributed power supplies  
• ASIC power supplies  
All support documentation can be found on Micrel’s web  
site at www.micrel.com.  
• DSP, µP, and µC power supplies  
Typical Application  
VCC = 12V  
C1  
0.01µF  
VIN =1.2V  
VOUT = 0.9V@7A  
IR3716S  
MIC5190  
IS  
OUT  
R1  
100Ω  
VIN  
VCC1  
VCC2  
EN  
FB  
C2  
10µF  
R2  
125Ω  
PGND  
SGND  
C3  
0.01µF  
COMP  
R3  
12.5kΩ  
GND  
GND  
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.  
PowerPAK is a trademark of Siliconix, Inc.  
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com  
M9999-120105  
December 2005  
1