Micrel
MIC4832
Ordering Information
Part Number
MIC4832YML
MIC4832YMM
Note
*MLF
is a GREEN RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.
®
Junction Temp. Range
–40° to +85°C
–40° to +85°C
Package
8-Pin 3mm × 3mm MLF
®
8-Pin MSOP
Lead Finish
RoHS Compliant / Pb-Free / Halogen Free*
RoHS Compliant / Pb-Free
Pin Configuration
8-Pin MSOP (MM)
8-Pin 3mm × 3mm MLF
®
(ML)
Pin Description
Pin Number
1
2
Pin Name
VDD
RSW
Pin Function
Supply (Input): 1.8V to 5.5V for internal circuitry.
Switch Resistor (External Component): Set switch frequency of the internal
power MOSFET by connecting an external resistor to VDD. Connecting the
external resistor to GND disables the switch oscillator and shuts down the
device.
EL Resistor (External Component): Set EL frequency of the internal H-bridge
driver by connecting an external resistor to VDD. Connecting the external
resistor to GND disables the EL oscillator.
Ground
Switch Node (Input): Internal high-voltage power MOSFET drain.
Regulated Boost Output (External Component): Connect to the output capacitor
of the boost regulator and connect to the cathode of the diode.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
3
REL
4
5
6
7
8
GND
SW
CS
VB
VA
March 2009
2
M9999-033109-C