Micrel
MIC4832
Ordering Information
Part Number
MIC4832YML
MIC4832YMM
Note
*MLF®
is a GREEN RoHS compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free.
Junction Temp. Range
–40° to +85°C
–40° to +85°C
Package
8-Pin 3mm × 3mm MLF
®
8-Pin MSOP
Lead Finish
RoHS Compliant / Pb-Free / Halogen Free*
RoHS Compliant / Pb-Free
Pin Configuration
8-Pin MSOP (MM)
8-Pin 3mm × 3mm MLF
®
(ML)
Pin Description
Pin Number
1
2
Pin Name
VDD
RSW
Pin Function
Supply (Input): 1.8V to 5.5V for internal circuitry.
Switch Resistor (External Component): Set switch frequency of the internal
power MOSFET by connecting an external resistor to VDD. Connecting the
external resistor to GND disables the switch oscillator and shuts down the
device.
3
REL
EL Resistor (External Component): Set EL frequency of the internal H-bridge
driver by connecting an external resistor to VDD. Connecting the external
resistor to GND disables the EL oscillator.
4
5
6
7
8
GND
SW
CS
VB
VA
Ground
Switch Node (Input): Internal high-voltage power MOSFET drain.
Regulated Boost Output (External Component): Connect to the output
capacitor of the boost regulator and connect to the cathode of the diode.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
EL Output: Connect to one end of the EL lamp. Polarity is not important.
November 2007
2
M9999-111507-B