MIC4426/4427/4428
Micrel
MIC4426/4427/4428
Dual 1.5A-Peak Low-Side MOSFET Driver
General Description
The MIC4426/4427/4428 family are highly-reliable dual low-
side MOSFET drivers fabricated on a BiCMOS/DMOS pro-
cess for low power consumption and high efficiency. These
drivers translate TTL or CMOS input logic levels to output
voltage levels that swing within 25mV of the positive supply
or ground. Comparable bipolar devices are capable of swing-
ing only to within 1V of the supply. The MIC4426/7/8 is
available in three configurations: dual inverting, dual nonin-
verting, and one inverting plus one noninverting output.
The MIC4426/4427/4428 are pin-compatible replacements
for the MIC426/427/428 and MIC1426/1427/1428 with im-
proved electrical performance and rugged design (Refer to
the Device Replacement lists on the following page). They
can withstand up to 500mA of reverse current (either polarity)
without latching and up to 5V noise spikes (either polarity) on
ground pins.
Primarily intended for driving power MOSFETs, MIC4426/7/8
drivers are suitable for driving other loads (capacitive, resis-
tive, or inductive) which require low-impedance, high peak
current, and fast switching time. Other applications include
driving heavily loaded clock lines, coaxial cables, or piezo-
electric transducers. The only load limitation is that total driver
power dissipation must not exceed the limits of the package.
Features
•
•
•
•
•
Bipolar/CMOS/DMOS construction
Latch-up protection to >500mA reverse current
1.5A-peak output current
4.5V to 18V operating range
Low quiescent supply current
4mA at logic 1 input
400µA at logic 0 input
Switches 1000pF in 25ns
Matched rise and rall times
7Ω output impedance
< 40ns typical delay
Logic-input threshold independent of supply voltage
Logic-input protection to –5V
6pF typical equivalent input capacitance
25mV max. output offset from supply or ground
Replaces MIC426/427/428 and MIC1426/1427/1428
Dual inverting, dual noninverting, and inverting/
noninverting configurations
ESD protection
MOSFET driver
Clock line driver
Coax cable driver
Piezoelectic transducer driver
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Applications
Functional Diagram
V
S
0.6mA
0.1mA
INVERTING
OUTA
INA
2kΩ
NONINVERTING
0.6mA
0.1mA
INVERTING
OUTB
INB
2kΩ
NONINVERTING
GND
September 1999
1
MIC4426/4427/4428