欢迎访问ic37.com |
会员登录 免费注册
发布采购

MIC37101-2.5YM 参数 Datasheet PDF下载

MIC37101-2.5YM图片预览
型号: MIC37101-2.5YM
PDF下载: 下载PDF文件 查看货源
内容描述: 1A低电压U CAP的LDO稳压器 [1A LOW VOLTAGE U CAP LDO REGULATOR]
分类和应用: 稳压器
文件页数/大小: 15 页 / 165 K
品牌: MICREL [ MICREL SEMICONDUCTOR ]
 浏览型号MIC37101-2.5YM的Datasheet PDF文件第2页浏览型号MIC37101-2.5YM的Datasheet PDF文件第3页浏览型号MIC37101-2.5YM的Datasheet PDF文件第4页浏览型号MIC37101-2.5YM的Datasheet PDF文件第5页浏览型号MIC37101-2.5YM的Datasheet PDF文件第6页浏览型号MIC37101-2.5YM的Datasheet PDF文件第7页浏览型号MIC37101-2.5YM的Datasheet PDF文件第8页浏览型号MIC37101-2.5YM的Datasheet PDF文件第9页  
MIC37100/37101/37102
Micrel
MIC37100/37101/37102
1A Low-Voltage
µ
Cap LDO Regulator
General Description
The MIC37100, MIC37101, and MIC37102 are 1A low-
dropout, linear voltage regulators that provide low-voltage,
high-current output from an extremely small package. Utiliz-
ing Micrel’s proprietary Super
βeta
PNP™ pass element, the
MIC37100/01/02 offers extremely low dropout (typically
280mV at 1A) and low ground current (typically 11mA at 1A).
The MIC37100 is a fixed output regulator offered in the
SOT-223 package. The MIC37101 and MIC37102 are fixed
and adjustable regulators, respectively, in a thermally en-
hanced power 8-lead SOIC (small outline package) and the
SOT-223 package. The MIC37102 is also available in the S-
PAK power package, for applications that require higher
power dissipation or higher operating ambient temperatures.
The MIC37100/01/02 is ideal for PC add-in cards that need
to convert from standard 5V to 3.3V, 3.3V to 2.5V or 2.5V to
1.8V or lower. A guaranteed maximum dropout voltage of
500mV over all operating conditions allows the
MIC37100/01/02 to provide 2.5V from a supply as low as 3V
and 1.8V from a supply as low as 2.3V.
The MIC37100/01/02 is fully protected with overcurrent lim-
iting and thermal shutdown. Fixed output voltages of 1.5V,
1.65V, 1.8V, 2.5V and 3.3V are available on MIC37100/01
with adjustable output voltages to 1.24V on MIC37102.
Features
• Fixed and adjustable output voltages to 1.24V
µ
µ
Cap Regulator, 10µF ceramic output capacitor
stable
• 280mV typical dropout at 1A
Ideal for 3.0V to 2.5V conversion
Ideal for 2.5V to 1.8V, 1.65V or 1.5V conversion
• 1A minimum guaranteed output current
• 1% initial accuracy
• Low ground current
• Current limiting and thermal shutdown
• Reversed-leakage protection
• Fast transient response
• Low-profile SOT-223 package
• Power SO-8 package
• S-PAK package (MIC37102 only)
Applications
LDO linear regulator for PC add-in cards
PowerPC™ power supplies
High-efficiency linear power supplies
SMPS post regulator
Multimedia and PC processor supplies
Battery chargers
Low-voltage microcontrollers and digital logic
For other voltages, contact Micrel.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
Typical Applications
Dropout
vs. Output Current
350
DROPOUT (mV)
V
IN
3.3V
MIC37100
IN
OUT
GND
300
2.5V
OUT
2.5V
10µF
ceramic
250
200
150
100
50
0
0
0.25
0.5
0.75
OUTPUT CURRENT (A)
1
3.3V
OUT
2.5V/1A Regulator
Super
βeta
PNP is a registered trademark of Micrel, Inc.
PowerPC is a trademark of IBM Corporation.
Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
September 2004
1
M9999-091604