欢迎访问ic37.com |
会员登录 免费注册
发布采购

MIC3003GML 参数 Datasheet PDF下载

MIC3003GML图片预览
型号: MIC3003GML
PDF下载: 下载PDF文件 查看货源
内容描述: FOM管理IC,具有内部校准 [FOM Management IC with Internal Calibration]
分类和应用:
文件页数/大小: 75 页 / 749 K
品牌: MICREL [ MICREL SEMICONDUCTOR ]
 浏览型号MIC3003GML的Datasheet PDF文件第2页浏览型号MIC3003GML的Datasheet PDF文件第3页浏览型号MIC3003GML的Datasheet PDF文件第4页浏览型号MIC3003GML的Datasheet PDF文件第5页浏览型号MIC3003GML的Datasheet PDF文件第6页浏览型号MIC3003GML的Datasheet PDF文件第7页浏览型号MIC3003GML的Datasheet PDF文件第8页浏览型号MIC3003GML的Datasheet PDF文件第9页  
MIC3003
FOM Management IC
with Internal Calibration
General Description
The MIC3003 is a fiber optic module controller which
enables the implementation of sophisticated, hot-pluggable
fiber optic transceivers with intelligent laser control and an
internally calibrated Digital Diagnostic Monitoring Interface
per SFF-8472. It essentially integrates all non-datapath
functions of an SFP transceiver into a tiny (4mm x 4mm)
MLF
®
package. It also works well as a microcontroller
peripheral in transponders or 10Gbps transceivers.
A highly configurable automatic power control (APC) circuit
controls laser bias. Bias and modulation are temperature
compensated using dual DACs, an on-chip temperature
sensor, and NVRAM look-up tables. A programmable
internal feedback resistor provides a wide dynamic range
for the APC. Controlled laser turn-on facilitates hot
plugging.
An analog-to-digital converter converts the measured
temperature, voltage, bias current, transmit power, and
received power from analog to digital. An EEPOT provides
front-end adjustment of RX power. Each parameter is
compared against user-programmed warning and alarm
thresholds. Analog comparators and DACs provide fast
monitoring of received power and critical laser operating
parameters. Data can be reported as either internally
calibrated or externally calibrated.
An interrupt output, power-on hour meter, and data-ready
bits add user friendliness beyond SFF-8472. The interrupt
output and data-ready bits reduce overhead in the host
system. The power-on hour meter logs operating hours
using an internal real-time clock and stores the result in
NVRAM.
In addition to the features listed above which are already
implemented in the previous MIC300x controllers, the
MIC3003 features an extended temperature range, options
to mask alarms and warnings interrupt and TXFAULT, a
reset signal source, and the ability to support up to four
chips with the same address on the serial interface. It also
supports eight-byte SMBus block writes.
Communication with the MIC3003 is via an industry
standard 2-wire SMBus serial interface. Nonvolatile
memory is provided for serial ID, configuration, and
separate OEM and user scratchpad spaces.
Datasheets and support documentation can be found on
Micrel’s web site at:
www.micrel.com.
Features
Extended temperature range
Alarms and warnings interrupt and TXFAULT masks
Capability to support up to four MIC3003 on one SMBus
APC or constant-current laser bias
Turbo mode for APC loop start-up and shorter laser turn
on time
Supports multiple laser types and bias circuit topologies
Integrated digital temperature sensor
Temperature compensation of modulation, bias, bias fault
and alarm thresholds via NVRAM look-up tables
NVRAM to support GBIC/SFP serial ID function
User writable EEPROM scratchpad
Reset signal compatible with some new systems
requirements
Diagnostic monitoring interface per SFF-8472
– Monitors and reports critical parameters:
temperature, bias current, TX and RX optical power,
and supply voltage
– S/W control and monitoring of TXFAULT, RXLOS,
RATESELECT, and TXDISABLE
– Internal or external calibration
– EEPOT for adjusting RX power measurement
Power-on hour meter
Interrupt capability
Extensive test and calibration features
2-wire SMBus-compatible serial interface
SFP/SFP+ MSA and SFF-8472 compliant
3.0V to 3.6V power supply range
5V-tolerant I/O
Available in (4mm x 4mm) 24-pin MLF
®
package
SFP/SFP+ optical transceivers
SONET/SDH transceivers and transponders
Fibre Channel transceivers
10Gbps transceivers
Free space optical communications
Proprietary optical links
Applications
MLF and
MicroLeadFrame
are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (
408
) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
November 2009
M9999-111209-C
hbwhelp@micrel.com
or (408) 955-1690