欢迎访问ic37.com |
会员登录 免费注册
发布采购

MIC2846A-PPYMT 参数 Datasheet PDF下载

MIC2846A-PPYMT图片预览
型号: MIC2846A-PPYMT
PDF下载: 下载PDF文件 查看货源
内容描述: 高效率的6通道线性WLED驱动器,带有DAM ?数字控制和双低IQ LDO的 [High Efficiency 6 Channel Linear WLED Driver with DAM?, Digital Control and Dual Low IQ LDOs]
分类和应用: 驱动器接口集成电路
文件页数/大小: 19 页 / 1502 K
品牌: MICREL [ MICREL SEMICONDUCTOR ]
 浏览型号MIC2846A-PPYMT的Datasheet PDF文件第2页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第3页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第4页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第5页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第6页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第7页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第8页浏览型号MIC2846A-PPYMT的Datasheet PDF文件第9页  
MIC2846A
High Efficiency 6 Channel Linear WLED
Driver with DAM™, Digital Control and Dual
Low I
Q
LDOs
General Description
The MIC2846A is a high efficiency White LED (WLED)
driver featuring two low quiescent current LDOs. It is
designed to drive up to six LEDs and greatly extend
battery life for portable display backlighting and keypad
backlighting in mobile devices. The MIC2846A architecture
provides the highest possible efficiency by eliminating
switching losses present in traditional charge pumps or
inductive boost circuits. With a typical dropout of 40mV at
20mA, the MIC2846A allows the LEDs to be driven directly
from the battery eliminating switching noise and losses
present with the use of boost circuitry.
The MIC2846A features Dynamic Averaged Matching™
(DAM™) which is specifically designed to get the optimum
matching despite process variations. This ensures a
typical matching of ±1.5% between all six LED channels.
The LED brightness is preset by an external resistor and
can be dimmed using a single-wire digital control. The
digital interface takes commands from digital programming
pulses to change the brightness in a logarithmic scale
similar to the eye’s perception of brightness. The single-
wire digital brightness control is divided into two modes of
operation; full brightness mode or battery saving mode for
a total of 49 brightness steps.
The MIC2846A also features two independently enabled
low quiescent current LDOs. Each LDO offers ±3%
accuracy over temperature, low dropout voltage (150mV
@ 150mA), and low ground current under all load
conditions (typically 35µA). Both LDOs can be turned off to
draw virtually no current.
The MIC2846A is available in the 2.5mm x 2.5mm 14-pin
Thin MLF
®
leadless package with a junction temperature
range of -40°C to +125°C
Datasheet and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
WLED Driver
High Efficiency (no Voltage Boost losses)
Dynamic Average Matching™ (DAM™)
Single wire digital control
Input voltage range: 3.0V to 5.5V
Dropout of 40mV at 20mA
Matching better than ±1.5% (typical)
Current accuracy better than ±1.5% (typical)
Maintains proper regulation regardless of how many
channels are utilized
LDOs
Very low ground current – Typical 35µA
Stable with 1µF ceramic output capacitor
Dropout at 150mV at 150mA
Thermal shutdown and current limit protection
Available in a 2.5mm x 2.5mm 14-pin Thin MLF
®
package
Applications
Mobile handsets
LCD Handset backlighting
Handset keypad backlighting
Digital cameras
Portable media/MP3 players
Portable navigation devices (GPS)
Portable applications
DAM, Dynamic Average Matching is a trademark of Micrel, Inc.
MLF and
MicroLeadFrame
are registered trademark Amkor Technology Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (
408
) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
April 2010
M9999-041210-D