W764M32V-XSBX
FIGURE 6 – PROGRAM OPERATIONS
tWC
tAS
PA
tAH
Addresses
CS#
555h
PA
PA
tCH
OE#
tWHWH1
tWP
tDS
WE#
tCS
tWPH
tDH
A0h
Status
DOUT
tRB
PD
Data
tBUSY
RY/BY#
VCC
tVCS
NOTES:
1. PA is the address of the memory location to be programmed.
2. PD is the data to be programmed at byte address.
3. DOUT is the output of the data written to the device.
4. Figure indicates last two bus cycles of four bus cycle sequence.
Microsemi Corporation reserves the right to change products or specifications without notice.
June 2012 © 2012 Microsemi Corporation. All rights reserved.
Rev. 10
8
Microsemi Corporation • (602) 437-1520 • www.microsemi.com
Not Recommended for New Designs — Replaced by W764M32V1-XBX