DRT-960 参数 Datasheet PDF下载

960W Three Phase Industrial DIN RAIL Power Supply

Features :

D R T- 9 6 0

series

Three-Phase AC 340 ~ 550V wide range input

High efficiency 91% and low dissipation

Protections: Short circuit / Overload / Over voltage / Over temperature

Optional parallel function(1+1)

Cooling by free air convection

Can be installed on DIN rail TS-35/7.5 or 15

UL 508(industrial control equipment)approved

EN61000-6-2(EN50082-2) industrial immunity level

100% full load burn-in test

3 years warranty

R

SPECIFICATION

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT

VOLTAGE ADJ. RANGE

VOLTAGE TOLERANCE

Note.3

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE

INPUT

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INRUSH CURRENT (max.)

LEAKAGE CURRENT

OVERLOAD

PROTECTION OVER VOLTAGE

OVER TEMPERATURE

WORKING TEMP.

WORKING HUMIDITY

ENVIRONMENT STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

SAFETY STANDARDS

WITHSTAND VOLTAGE

SAFETY &

EMC

(Note 4)

DRT-960-24

24V

40A

0 ~ 40A

960W

24 ~ 28V

1.0%

0.5%

0.5%

200ms, 60ms/400VAC

200ms, 60ms/500VAC at full load

DRT-960-48

48V

20A

0 ~ 20A

960W

80mVp-p

48 ~ 55V

1.0%

0.5%

0.5%

RIPPLE & NOISE (max.)

Note.2

80mVp-p

14ms/400VAC

30ms/500VAC at full load

Three-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG

Note.5

)

47 ~ 63Hz

91%

2A/400VAC

1.6A/500VAC

COLD START 50A

<3.5mA / 530VAC

105 ~ 125% rated output power

Protection type : Constant current limiting, unit will shut down o/p voltage after 3 sec. , re-power on to recover

30 ~ 36V

59 ~ 66V

Protection type : Shut down o/p voltage, re-power on to recover

110

5 (TSW1) Detect on heatsink of power transistor

85

-20 ~ +60

-40 ~ +85

(Refer to output load derating curve)

, 10 ~ 95% RH

5

(TSW2) Detect on heatsink of power diode

92%

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

20 ~ 90% RH non-condensing

0.03%/ (0 ~ 50

Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

UL508, UL60950-1, TUV EN60950-1 Approved

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

ISOLATION RESISTANCE

HARMONIC CURRENT

EMS IMMUNITY

MTBF

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMI CONDUCTION & RADIATION

Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B

Compliance to EN61000-3-2,-3

Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A

122.5Khrs min. MIL-HDBK-217F (25 )

276*125.2*100mm (W*H*D)

3.3Kg; 4pcs/14.2Kg/1.14CUFT

OTHERS

NOTE

DIMENSION

PACKING

1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

5. Dual phase operation(connecting L1,L3,FG)is allowed under certain derating to output load. Please refer to the derating curves for details.

File Name:DRT-960-SPEC 2007-01-12