1W SIP Package DC-DC Unregulated Converter
SPU01 & DPU01 series
SPECIFICATION
VOLTAGE RANGE
SURGE VOLTAGE (100ms max.) 5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc
L: 4.5 ~ 5.5Vdc , M: 10.8 ~ 13.2Vdc , N: 21.6 ~ 26.4Vdc
FILTER
Internal capacitor
INPUT
PROTECTION
Fuse recommended. 500mA Slow-Blow Type for all models
INTERNAL POWER DISSIPATION 500mW
VOLTAGE ACCURACY
RATED POWER
3.0%
1W
RIPPLE & NOISE Note.2 75mVp-p
OUTPUT
LINE REGULATION Note.3 1.2% for 1% input variation
LOAD REGULATION Note.4 10%
SWITCHING FREQUENCY (Typ.) 24Vin: 75KHz, other: 100KHz
PROTECTION
SHORT CIRCUIT
1 second max.
Free-air convection
COOLING
-40 ~ +90℃ (Refer to "Derating Curve")
+100℃ max.
WORKING TEMP.
CASE TEMPERATURE
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
SOLDERING TEMPERATURE
VIBRATION
20% ~ 90% RH non-condensing
-55 ~ +125℃, 10 ~ 95% RH non-condensing
ENVIRONMENT
0.03% / ℃ (0 ~ 85℃)
1.5mm from case of 1 ~ 3sec./260℃ max.
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
I/P-O/P:1.5KVDC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
ISOLATION CAPACITANCE (Typ.)
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
10pF
Parameter
Standard
Test Level / Note
N/A
Conducted
EN55032(CISPR32)
EN55032(CISPR32)
Standard
EMC EMISSION
Radiated
Class A
SAFETY &
Parameter
Test Level / Note
Level 2, 8KV air, 4KV contact
Level 2, 3V/m
EMC
( Note.5)
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Radiated Susceptibility
EFT/Burest
EMC IMMUNITY
Level 1, 0.5KV
Surge
Level 1, 0.5KV Line-Line
Level 2, 3V(e.m.f.)
Level 2, 3A/m
Conducted
Magnetic Field
1500Khrs MIL-HDBK-217F(25℃)
MTBF
DIMENSION (L*W*H)
CASE MATERIAL
PACKING
5/12Vin models:19.5*6.1*10.2mm (0.77*0.24*0.40 inch); 24Vin models:19.5*7.2*10.2mm (0.77*0.28*0.40 inch)
Non-Conductive black plastic (UL 94V-0 rated)
OTHERS
NOTE
5/12Vin models: 1.8g; 24Vin models: 2.7g
1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 20% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please
refer to EMI testing of component power supplies.(as available on http://www.meanwell.com)
File Name:SPU01,DPU01-SPEC 2017-03-06
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
