2W SIP Package DC-DC Regulated Converter
SPAN02 & DPAN02 series
SPECIFICATION
VOLTAGE RANGE
SURGE VOLTAGE (100ms max.) 5Vin models : 15Vdc ; 12Vin models : 25Vdc ; 24Vin models : 50Vdc ; 48Vin models : 100Vdc
E: 4.5~9Vdc , A: 9~18Vdc , B: 18~36Vdc , C: 36~75Vdc
FILTER
Internal capacitor
INPUT
PROTECTION
Fuse recommended. 5Vin models: 1000mA Slow-Blow Type, 12Vin models: 500mA Slow-Blow Type, 24V and 48Vin models: 250mA Slow-Blow Type
INTERNAL POWER DISSIPATION 500mW
VOLTAGE ACCURACY
RATED POWER
1.5%
2W
RIPPLE & NOISE Note.2 75mVp-p
LINE REGULATION Note.3 0.5%
OUTPUT
LOAD REGULATION Note.4 Single output models: 0.5%, Dual output models: 1%
SWITCHING FREQUENCY (Typ.) 100KHz
SHORT CIRCUIT
OVERLOAD
Protection type : Continuous, automatic recovery
Protection type : Recovers automatically after fault condition is removed
PROTECTION
FUNCTION
Start-up voltage
5Vin : 4.2Vdc ; 12Vin : 7.3Vdc ; 24Vin : 15.5Vdc ; 48Vin : 31Vdc
5Vin : 3Vdc ; 12Vin : 5.8Vdc ; 24Vin : 12Vdc ; 48Vin : 24Vdc
UNDER VOLTAGE LOCKOUT
Shutdown voltage
REMOTE CONTROL
COOLING
Power ON: R.C. ~ -Vin <0.8Vdc or open circuit; Power OFF: R.C. ~ -Vin >4 ~ 15Vdc or short
Free-air convection
-40 ~ +90℃ (Refer to "Derating Curve")
+100℃ max.
WORKING TEMP.
CASE TEMPERATURE
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
SOLDERING TEMPERATURE
VIBRATION
20% ~ 90% RH non-condensing
ENVIRONMENT
-55 ~ +125℃, 10 ~ 95% RH non-condensing
0.03% / ℃ (0 ~ 85℃)
1.5mm from case of 1 ~ 3sec./260℃ max.
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
I/P-O/P:1.5KVDC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
ISOLATION CAPACITANCE (Typ.)
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
10pF
Parameter
Standard
Test Level / Note
N/A
Conducted
EN55032(CISPR32)
EN55032(CISPR32)
Standard
EMC EMISSION
Radiated
Class A
SAFETY &
Parameter
Test Level / Note
Level 2, 8KV air, 4KV contact
Level 2, 3V/m
EMC
( Note.5)
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Radiated Susceptibility
EFT/Burest
EMC IMMUNITY
Level 1, 0.5KV
Surge
Level 1, 0.5KV Line-Line
Level 2, 3V(e.m.f.)
Level 2, 3A/m
Conducted
Magnetic Field
2500Khrs MIL-HDBK-217F(25℃)
MTBF
DIMENSION (L*W*H)
CASE MATERIAL
PACKING
21.8*9.2*11.1mm (0.86*0.36*0.44 inch)
Non-Conductive black plastic (UL 94V-0 rated)
4.8g
OTHERS
NOTE
1.All parameters are specified at normal input(E:5Vdc, A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please
refer to EMI testing of component power supplies.(as available on http://www.meanwell.com)
File Name:SPAN02,DPAN02-SPEC 2017-03-06
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
