150W Single Output Switching Power Supply
Features :
CLG-150
series
Universal AC input / Full range (up to 295VAC)
Built-in active PFC function
High efficiency 91%
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal
potentiometer
IP65 / IP67 design for indoor or outdoor installations
Suitable for LED lighting and moving sign applications
Compliance to worldwide safety regulations for lighting
3 years warranty
F
110
SELV
IP65 IP67
( for UL8750 48V only)
(option)
CLG-150-12 A
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal
potentiometer.
B : IP67 rated. Constant current level adjustable through output cable.
C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
potentiometer.
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
RATED POWER
CLG-150-12
12V
11A
132W
CONSTANT CURRENT REGION
Note.4
9 ~12V
CLG-150-15
15V
11.25 ~ 15V
9.5A
142.5W
150mVp-p
13 ~ 17V
4.75 ~ 9.5A
2.0%
0.5%
1.0%
CLG-150-20
20V
15 ~ 20V
7.5A
150W
150mVp-p
17 ~ 22V
3.75 ~ 7.5A
2.0%
0.5%
1.0%
230VAC /115VAC
CLG-150-24
24V
18 ~ 24V
6.3A
151.2W
150mVp-p
22 ~ 27V
3.15 ~ 6.3A
1.0%
0.5%
0.5%
CLG-150-30
30V
22.5 ~ 30V
5A
150W
150mVp-p
26 ~ 32V
2.5 ~ 5A
1.0%
0.5%
0.5%
CLG-150-36
36V
27 ~ 36V
4.2A
151.2W
150mVp-p
31 ~ 41V
2.1 ~ 4.2A
1.0%
0.5%
0.5%
CLG-150-48
48V
36 ~ 48V
3.2A
153.6W
200mVp-p
40 ~ 56V
1.6 ~ 3.2A
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
150mVp-p
VOLTAGE ADJ. RANGE
Note.6
9 ~ 13V
OUTPUT
CURRENT ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT(max.)
LEAKAGE CURRENT
OVER CURRENT (Typ.)
Note.4
SHORT CIRCUIT
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
Note.7
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
EMC EMISSION
5.5 ~ 11A
2.0%
0.5%
1.0%
50ms / 230VAC
Note.5
90 ~ 295VAC
Can be adjusted by internal
potentiometer or through output cable
3000ms, 80ms at full load
16ms / 115VAC at full load
127 ~ 417VDC
47 ~ 63Hz
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
88%
88%
90%
90%
91%
91%
91%
2A / 115VAC
1A / 230VAC
COLD START 65A/230VAC
<1mA / 240VAC
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
13.5 ~ 16V
18 ~ 20V
23 ~ 27V
28 ~ 34V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
100
10
(RTH2)
Protection type : Shut down o/p voltage, re-power on to recover
33 ~ 36V
42 ~ 48V
57 ~ 65V
-30 ~ +70
(Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/
(0 ~ 50 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, UL1012 ; EN61347-1, EN61347-2-13 independent (except for CLG-150 C type) ; UL60950-1, TUV EN60950-1 ;
J61347-1(option, except for CLG-150 C type), J61347-2-13, IP65 or IP67 approved
I/P-O/P:3.75KVAC
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
75% load) ; EN61000-3-3
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (
303.7Khrs min. MIL-HDBK-217F (25 )
222.2*68*38.8mm (L*W*H)(CLG-150-Blank/A/B)
1.0Kg; 12pcs/13Kg/0.58CUFT(CLG-150-Blank/A/B)
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
229*68*38.8mm (L*W*H)(CLG-150-C)
1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 75% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the
static characteristics
for more details.
6. Type A and type C only.
7. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.
8
. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
