DATASHEET
16V SMALL CELL MODULE
NOTES
1. Capacitance and ESRDC measured at 25°C per
Document Number 1007239 available at
www.maxwell.com.
8. Estored = ½ CV2
3,600
9. Cycle per Document Number 1007239 available at
www.maxwell.com.
10. No more than 10% decrease in capacitance from
minimum initial capacitance or 50% increase in ESR
from maximum initial ESR.
2. Per Maxwell Document 1007239 available at
www.maxwell.com.
½ CV
3. Maximum Peak current (1 sec) =
C x ESRDC + 1
11. Tested at 1 kV DC.
4. After 72 hours at 25°C and rated voltage. Initial
leakage current can be higher.
12. For a given application, sufficient cooling must be
provided to keep cell case temperatures below 65°.
See Rth.
13. Duration = 60 seconds. Not intended as an operating
parameter.
14. Absolute maximum voltage non repeated, not to
exceed 1 second.
0.12V2
5. Per IEC 62391-2, Pd =
ESRDC x mass
V2
6. Pmax
=
4 x ESRDC x mass
½ CV2
3,600 x mass
7. Emax
=
MOUNTING RECOMMENDATIONS
MARKINGS
Recommended mounting screw M4. Maximum torque
on mounting screws 4 Nm. All 6 mounting locations
must be utilized to meet vibration specifications.
Products are marked with the following information:
Rated capacitance, rated voltage, product number,
name of manufacturer, positive and negative terminal,
and serial number.
Page 4 Document number: 1015371.5 maxwell.com
MAXWELL [ MAXWELL TECHNOLOGIES ]
