AVAILAB
LE
MAX7219/MAX7221
Serially Interfaced, 8-Digit LED Display Drivers
General Description
The MAX7219/MAX7221 are compact, serial input/out-
put common-cathode display drivers that interface
microprocessors (µPs) to 7-segment numeric LED dis-
plays of up to 8 digits, bar-graph displays, or 64 indi-
vidual LEDs. Included on-chip are a BCD code-B
decoder, multiplex scan circuitry, segment and digit
drivers, and an 8x8 static RAM that stores each digit.
Only one external resistor is required to set the seg-
ment current for all LEDs. The MAX7221 is compatible
with SPI™, QSPI™, and MICROWIRE™, and has slew-
rate-limited segment drivers to reduce EMI.
A convenient 4-wire serial interface connects to all
common µPs. Individual digits may be addressed and
updated without rewriting the entire display. The
MAX7219/MAX7221 also allow the user to select code-
B decoding or no-decode for each digit.
The devices include a 150µA low-power shutdown
mode, analog and digital brightness control, a scan-
limit register that allows the user to display from 1 to 8
digits, and a test mode that forces all LEDs on.
For applications requiring 3V operation or segment
blinking, refer to the MAX6951 data sheet.
♦
10MHz Serial Interface
♦
Individual LED Segment Control
♦
Decode/No-Decode Digit Selection
♦
150µA Low-Power Shutdown (Data Retained)
♦
Digital and Analog Brightness Control
♦
Display Blanked on Power-Up
♦
Drive Common-Cathode LED Display
♦
Slew-Rate Limited Segment Drivers
for Lower EMI (MAX7221)
♦
SPI, QSPI, MICROWIRE Serial Interface (MAX7221)
♦
24-Pin DIP and SO Packages
Features
Ordering Information
PART
MAX7219CNG
MAX7219CWG
MAX7219C/D
MAX7219ENG
TEMP RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
PIN-PACKAGE
24 Narrow Plastic DIP
24 Wide SO
Dice*
24 Narrow Plastic DIP
Applications
Bar-Graph Displays
Industrial Controllers
Panel Meters
LED Matrix Displays
MAX7219EWG
-40°C to +85°C
24 Wide SO
MAX7219ERG
-40°C to +85°C
24 Narrow CERDIP
Ordering Information continued at end of data sheet.
*Dice are specified at T
A
= +25°C.
Pin Configuration
Functional Diagrams
TOP VIEW
DIN 1
DIG 0 2
DIG 4 3
GND 4
DIG 6 5
DIG 2 6
DIG 3 7
DIG 7 8
GND 9
DIG 5 10
DIG 1 11
LOAD (CS) 12
24 DOUT
23 SEG D
22 SEG DP
21 SEG E
Typical Application Circuit
+5V
19
9.53kΩ
18
ISET
V+
DIG 0–DIG 7
8 DIGITS
MOSI
μP
I/O
SCK
1
12
13
9
MAX7219
MAX7221
20 SEG C
19 V+
18 ISET
17 SEG G
16 SEG B
15 SEG F
14 SEG A
13 CLK
MAX7219
DIN
MAX7221
LOAD (CS)
CLK
GND
GND
4
SEG A–G,
SEG DP
8 SEGMENTS
Pin Configurations appear at end of data sheet.
( ) MAX7221 ONLY
DIP/SO
( ) MAX7221 ONLY
8-DIGIT
μP
DISPLAY
Functional Diagrams continued at end of data sheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
SPI and QSPI are trademarks of Motorola Inc. MICROWIRE is a trademark of National Semiconductor Corp.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-4452; Rev 4; 7/03