DA6503.005
14 December 2016
ELECTRICAL CHARACTERISTICS
TA = -40oC to +85oC, VDD = 2.7V, Typ TA = 27oC, Typ VDD = 2.7 V, RSENSOR = 4.5k unless otherwise noted
Parameter
Resolution
Symbol
Conditions
Min
Typ
Max
Unit
VN
Pressure mode,
ISR=373mV, VIN=0V
Reg OFF
OSR=4096
OSR=2048
OSR=1024
OSR=512
2.25 (17.4)
3.02 (16.9)
4.28 (16.4)
5.63 (16.0)
9.16 (15.3)
µVRMS (bit)
OSR=256
Note 1.
Linearity
INLBIT
ISRLIN = 298 mV
Reg OFF
OSR=4096
OSR=2048
OSR=1024
OSR=512
15.1
15.1
14.9
14.7
14.3
Bit
OSR=256
Note 2.
VDD Sensitivity in VDDSENSP
Pressure Mode
Pressure mode,
VREG =1.8V
VDD step 1.9V 3.6V
OSR=4096
Note 3.
Temperature mode,
VREG =1.8V
0.00017
%FS/V
%FS/V
VDD Sensitivity in VDDSENST
Temperature
Mode
VDD step 1.9V 3.6V
OSR=4096
0.077
Note 3.
Note 1. Resolution in bits is calculated as follows: VN_BIT=log(ISR / VN)/log(2) when VN is the RMS noise voltage.
Note 2. Linearity in bits is calculated as follows: INLBIT=log(CODELIN / INL)/log(2) when integral nonlinearity (INL) is calculated from best fit
line to linear input signal range containing 21 pcs analysis points.
Note 3. VDD sensitivity in %FS/V calculated as follows: VDDSENS =100%*((CODE @ VDDMAX) – (CODE @ VDDMIN))/CODEFS/(VDDMAX
-
VDDMIN) where VDDMAX=3.6V and VDDMIN=1.9V when the regulator is enabled (ENREG=1). and set to VREG=1.8V (REGEB=00).
6 (34)