MVPG15x/MVPG16
Datasheet
Figure 64: Top Traces, Vias, and Copper (Not to scale)—MVPG15x
Connect the
input voltage
plane to this
point.
Connect the
LDO regulator
output voltage
at this point.
Connect the
ground plane of
the board to
this point.
Connect the
ground plane of
the board to
this point.
Connect the
Buck regulator
output voltage
at this point.
Figure 65: Top Traces, Vias, and Copper (Not to scale)—MVPG16
Do not connect this signal
ground to the board
ground on the top layer.
Do not connect
this signal
ground to the
board ground
on the top layer.
Connect VIN
trace at this
point.
Connect BUCK_OUT
trace at this point.
Connect the ground
plane of the board
to this point.
Doc. No. MV-S102809-00 Rev. G
Page 52
Copyright © 2008 Marvell
April 14, 2008, 2.00
Document Classification: Proprietary