MV76100
Hardware Specifications
9.2
Recommended Operating Conditions
Table 23: Recommended Operating Conditions
Parameter
VDD
Min
0.95
1.7
Typ
1.0
Max
1.05
1.9
Units
Comments
V
V
Core voltage
IREF_AVDD
1.8
SATA and USB PHYs current source
voltage filtered 1.8V
VDD_CPU
PLL_AVDD
VDD_GE
0.95
1.7
1.0
1.8
1.8
1.05
1.9
V
V
V
CPU core voltage
Analog supply for the internal PLL
1.7
1.9
I/O voltage for:
RGMII/SMI 1.8V interfaces
NOTE: VDD_GE can be set to either 1.8V
or 3.3V according to Section 7.2,
Hardware Reset, on page 51.
3.15
1.7
3.3
3.45
V
V
V
V
I/O voltage for:
RGMII/GMII/MII/SMI 3.3V interfaces
VDD_M
1.8
1.9
I/O voltage for:
SDRAM DDR2 interface
M_VREF
VDDO_A
0.49*VDD_
M
0.5*VDD_M
3.3
0.51*VDD_M
3.45
Reference voltage for:
SDRAM DDR2 interface
3.15
I/O voltage for:
TWSI1, JTAG, and SPI interfaces
VDDO_B,
VDDO_C,
VDDO_D
1.7
1.8
3.3
1.9
V
V
I/O voltage for:
Device Bus, TWSI0, UART interfaces, and
MPP
3.15
3.45
NOTE: VDDO_B, VDDO_C, and
VDDO_D can be set to either 1.8V
or 3.3V according to Section 7.2,
Hardware Reset, on page 51.
PEX0_AVDD,
PEX1_AVDD
1.7
1.8
3.3
1.9
V
V
Voltage for:
PCI Express interface
USB0_AVDD,
USB1_AVDD,
USB2_AVDD
3.15
3.45
I/O voltage for:
USB interface
SATA_AVDD
2.375
0
2.5
2.625
105
V
Voltage for:
SATA interface
TJ
° C
Junction Temperature
MV-S105424-U0 Rev. B
Page 62
Copyright © 2008 Marvell
Document Classification: Proprietary Information
December 6, 2008, Preliminary
MARVELL [ MARVELL TECHNOLOGY GROUP LTD. ]
