Mechanical Dimensions
Allꢀdimensionsꢀareꢀinꢀmm.ꢀToleranceꢀisꢀ±0.25ꢀmmꢀunlessꢀotherwiseꢀnoted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burrꢀaroundꢀbottomꢀofꢀepoxyꢀmayꢀbeꢀ0.5ꢀmmꢀmax.
Notes
RoHS Compliance
Theꢀlevelsꢀofꢀenvironmentallyꢀsensitive,ꢀpersistentꢀbiologicallyꢀtoxicꢀ(PBT),ꢀpersistentꢀorganicꢀpollutantsꢀ(POP),ꢀorꢀ
otherwiseꢀrestrictedꢀmaterialsꢀinꢀthisꢀproductꢀareꢀbelowꢀtheꢀmaximumꢀconcentrationꢀvaluesꢀ(alsoꢀreferredꢀtoꢀasꢀtheꢀ
thresholdꢀlimits)ꢀpermittedꢀforꢀsuchꢀsubstances,ꢀorꢀareꢀusedꢀinꢀanꢀexemptedꢀapplication,ꢀinꢀaccordanceꢀwithꢀEUꢀDirec-
tiveꢀ2002/95/ECꢀonꢀtheꢀrestrictionꢀofꢀtheꢀuseꢀofꢀcertainꢀhazardousꢀsubstancesꢀinꢀelectricalꢀandꢀelectronicꢀequipmentꢀ
(RoHS),ꢀasꢀamendedꢀthroughꢀAprilꢀ21,ꢀ2006.
Vision Advisory Claim
UsersꢀshouldꢀbeꢀcautionedꢀnotꢀtoꢀstareꢀatꢀtheꢀlightꢀofꢀthisꢀLEDꢀproduct.ꢀTheꢀbrightꢀlightꢀcanꢀdamageꢀtheꢀeye.
Cree,ꢀInc.
4600 Silicon Drive
Durham,ꢀNCꢀ27703
Copyrightꢀ©ꢀ2010ꢀCree,ꢀInc.ꢀAllꢀrightsꢀreserved.ꢀTheꢀinformationꢀinꢀthisꢀdocumentꢀisꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.ꢀCreeꢀandꢀ
theꢀCreeꢀlogoꢀareꢀregisteredꢀtrademarksꢀofꢀCree,ꢀInc.ꢀ
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
7
CLD-CT1114.000
MARKTECH [ MARKTECH CORPORATE ]
